Catalogue Pièces et Accessoires Jeep Teraflex - Amortisseurs Falcon et Amortisseurs Fox

Nomad Wheel – 6x139m. Round out your build with a set of these tough and durable TeraFlex Nomad Off-Road Wheels. Its modular plug system accepts our all-new proprietary Air Deflator Valve that allows you to quickly air down your tires to a preset pressure.

Référence : 53-JS-6810

JK D-Ring Mount. Many bumpers do not include a mounting point for Recovery D-Ring Shackles. These JK: D-Ring Mounts work with most aftermarket bumpers. Bolts to the factory frame mounting points with the bumper. Sold individually — 2 REQUIRED per vehicle.

Référence : 53-JS-6762

Flat Hat – Red. The premium TeraFlex FlexFit Flat Visor Hat features embroidered 3D TeraFlex and Icon logos on front and TeraFlex Icon logo on back, flat bill visor with color-matching underside and 8-row stitching, and a 6-panel high-profile 3.75” crown.

Référence : 53-JS-5982

TJ T-Case Lowering. This TeraFlex 2003-2006 TJ SWB: 1” Transfer Case Lowering Spacer Kit lowers the transfer case to reduce driveshaft vibration caused by 2” or more lift – especially without either a slip yoke eliminator kit or adjustable control arms.

Référence : 53-JS-6623

JK Axle Sleeve Kit. TeraFlex JK: Front Axle Inner Sleeve Kits reinforce the weak axle tubing on JK Wrangler/Unlimited Dana 30 or Dana 44 factory axles. This prevents unwanted bending or breaking under extreme conditions.

Référence : 53-JS-5903

JTED Falcon 3.3 Kit. Falcon SP2 3.3 Fast Adjust Piggyback Shocks offer a wide range of adjustability with their easy to use 3-Position Fast Adjust Knob. Settings include Soft, Custom, and Firm. Features an 8-Position Micro Adjust Dial for more precise tuning.

Référence : 53-JS-5719

Banner – 3ft X 4.5ft. Make your garage the coolest hangout spot in the neighborhood with this large Falcon Performance Shocks Banner! Perfect for the blank spot on your wall to show off your favorite shock absorber company!

Référence : 53-JS-6009

TJ 4” 8-Arm & 9550. TeraFlex Suspension Systems include all the components necessary to raise your Jeep for more off-road ground clearance while maintaining good drivability on- and off-road.

Référence : 53-JS-6455

JL4 2.5” RT2 Base. The TeraFlex JL: 2.5" RT2 Coil Spring Base Lift Kits are the basis for our JL: 2.5” Alpine RT2 Short Arm Suspension Systems. Not a complete kit – requires additional components listed in the notes below.

Référence : 53-JS-6343

JL Hard Top Handles. Ease the removal and installation of your Jeep’s hard top with this Hard Top Handle Kit. Rubber bumpers protect the underside during storage.

Référence : 53-JS-6048

JK Spring Spacer. Use these TeraFlex JK: Coil Spring Spacers to level out a loaded vehicle. Compatible with stock height or lifted vehicles.

Référence : 53-JS-6677

JK Tera44 Shaft Kit . Replace your weak stock front axle shafts with a set of heavy-duty TeraFlex Axle Shafts! Comes assembled with our 32-spline Front Outer Stub Shafts and Spicer 1350-Series (Rubicon) U-Joints. Complete kit includes both sides.

Référence : 53-JS-5839

XJ 2" Lift Kit. The TeraFlex XJ Cherokee: 2" Performance Spacer & 1.5" Shackle Lift Kit is the most economical way to raise your unibody XJ Cherokee with the least amount of modifications making them perfect for daily drivers and weekend travelers!

Référence : 53-JS-6381

JL2 Springs – Front. TeraFlex JL: Lift Coil Springs are perfectly engineered for your JL Jeep Wrangler/Unlimited. Our Lift Coil Springs deliver unsurpassed highway handling and off-road performance.

Référence : 53-JS-6600

YJ Sway Bar QD Kitt. Sway Bar Links quickly disconnect and swing up out of the way for unrestricted axle articulation during off-roading. While connected for street use, the link provides immediate reaction during sway bar loading to eliminate excess play.

Référence : 53-JS-6536

JK4 ARB Seat Mount. Mount your ARB On-Board High Performance 12-Volt Twin Air Compressor conveniently under the front passenger seat of your 4-door JK Wrangler Unlimited with this ARB Air Compressor Under Seat Mount Kit.

Référence : 53-JS-5806

JK CRD60 4-6”. The unloaded Tera CRD60 HD Rear Axle Assembly w/ Semi-Float includes semi-float outer axles, Super 60 bearings, inner axle shafts, and sensors. Add your choice of ring & pinion gear ratio, locker, and carrier.

Référence : 53-JS-5463

JK Tera44 4.10 ARB. Our Tera44 HD Front Axle Housing w/ Ring & Pinion & ARB Locker provides a choice of pre-installed ring & pinion gears, ARB air locker, and TeraFlex HD Ball Joints. Requires new inner axle shafts and transferring of some exiting components.

Référence : 53-JS-5479

JK HD Ball Joints. TeraFlex JK: HD Ball Joints are engineered to handle the increased load caused by oversized tires and offset wheels. Fits all JK Wrangler/Unlimited models with Dana 30 or Dana 44 front axles.

Référence : 53-JS-6113

TeraFlex Lanyard. Even though you may be stuck in the corporate office world during the week, you can still sneak in a little of your Jeep lifestyle with the TeraFlex Lanyard. Attach your I.D. badge, keys, or whatever you want.

Référence : 53-JS-5923

LJ Long Arm Kit. TeraFlex TJ: LCG Long Control Arms and LCG Long Arm Brackets provide complete alignment adjustability and dependability for maximum performance on TJ Wrangler/Unlimited models with 3-5” lifts.

Référence : 53-JS-6432

JK Sway Bar Link. Reduce clearance issues between the tire and rear sway bar with the TeraFlex JK: Rear Sway Bar Link Kit w/ Swivel Stud. Constructed to OEM quality standards for long-term durability.

Référence : 53-JS-6550

JK 2.1Stabilizer–RHD.

Référence : 53-JS-5656