Direction

Référence : 53-JS-6100

Année(s) : 96-18

JL–JT 9550Stabilizer. The TeraFlex JL / JT: 9550 VSS Steering Stabilizer reduces bump steer, front end shimmy, and/or wobble in modified JL Wrangler/Unlimited and JT Gladiator models with lifted suspension systems and larger off-road tires.

Référence : 53-JS-6101

JL–JT TieRodDragLink. The TeraFlex JL / JT: HD Chromoly Tie Rod Kit and HD Forged Drag Link Kit withstand extreme conditions and abuse that typically causes factory steering components to bend and fail on all JL Wrangler/Unlimited and JT Gladiator models.

Référence : 53-JS-6109

JL–JT HD Tie Rod Kit. The TeraFlex JL / JT: HD Chromoly Tie Rod Kit withstands extreme conditions and abuse that typically causes factory steering components to bend and fail on stock and lifted JL Wrangler/Unlimited and JT Gladiator models.

Référence : 53-JS-6110

JK–TJ BallJoint Tool. This Lower Ball Joint Preload Adjustment Tool is designed for newer “Frog Eye” Ball Joints with adjustable ball stud retaining ring and two offset zerk fittings. Fits TeraFlex “Frog Eye” style Lower Ball Joints sold fall of 2017 and later

Référence : 53-JS-6096

JK HD Ball Joints. TeraFlex JK: HD Ball Joints are engineered to handle the increased load caused by oversized tires and offset wheels. Fits all JK Wrangler/Unlimited models with Dana 30 or Dana 44 front axles.

Référence : 53-JS-6113

JL–JT HD Drag Link. The TeraFlex JL / JT: HD Forged Drag Link Kit withstands extreme conditions and abuse that typically causes factory steering components to bend and fail on stock and lifted JL Wrangler/Unlimited and JT Gladiator models.

Référence : 53-JS-6111

JK High Knuckles. TeraFlex JK: Dana 30/44 High Steer Knuckles address several weaknesses prevalent in the stock axle steering configuration on JK Wrangler/Unlimited models with 4–6” lift kits.

Référence : 53-JS-6121

Ball Joint Tool. This Lower Ball Joint Preload Adjustment Tool is designed for ball joints with a threaded top cap to adjust preload and a lateral grease fitting. Fits ball joints sold before August 2017.

Référence : 53-JS-6094

TJ High Knuckle . The TeraFlex TJ: Dana 30/44 High Steer Knuckle beefs up the steering, maximizes steering component ground clearance, and restores correct steering geometry for superior highway drivability.

Référence : 53-JS-6124

60 Steering Arm.

Référence : 53-JS-6117

TJ Drag Link/Tie Rod. The complete TeraFlex TJ: High Steer Drag Link & Tie Rod End Replacement Kit includes all of the components needed to raise or “flip” the tie rod over the knuckle to increase ground clearance an additional 3” for added tie rod protection.

Référence : 53-JS-6129

JK High Steer System. The complete TeraFlex JK: Dana 30/44 High Steer System w/ HD Chromoly Tie Rod Kit & HD Forged Drag Link Flip Kit addresses all the front-end steering issues associated with lifted JK Wrangler/Unlimited models. Recommended for 4”+ lifts.

Référence : 53-JS-6123

JK HD Tie Rod Clamp. Easily adjust toe setting, differential clearance, and lock-to-lock steering position with this Hydraulic Ram Assist HD Tie Rod Clamp. Features a 5/8”-18 threaded bung to easily attach a hydraulic ram assist to our 1-5/8" HD Tie Rod.

Référence : 53-JS-6092

JK HD Ball Joints. TeraFlex JK: HD Ball Joints are engineered to handle the increased load caused by oversized tires and offset wheels. Fits all JK Wrangler/Unlimited models with Dana 30 or Dana 44 front axles.

Référence : 53-JS-6114

JK DragLink Flip Kit. The TeraFlex JK: HD Forged Drag Link Flip Kit withstands extreme conditions and abuse that typically causes factory steering components to bend and fail on lifted JK Wrangler/Unlimited models.

Référence : 53-JS-6108

JL–JT HD Ball Joints. TeraFlex JL / JT: HD Ball Joints are engineered to handle the increased load caused by oversized tires and offset wheels. Fits all JL Wrangler/Unlimited and JT Gladiator models with Dana 30 or Dana 44 front axles.

Référence : 53-JS-6116

JK Stabilizer Mount. The TeraFlex JK: Steering Stabilizer Relocation Kit moves the steering stabilizer up nearly 2.5” to help reduce damage to the steering stabilizer shaft or body. Fits 1-3/8” stock tie rod.

Référence : 53-JS-6091

JK Tie Rod–Drag Link. The TeraFlex JK: HD Chromoly Tie Rod Kit and HD Forged Drag Link Kit withstands extreme conditions and abuse that typically causes factory steering components to bend and fail on lifted JK Wrangler/Unlimited models.

Référence : 53-JS-6104

TJ Stabilizer Mount. The TeraFlex TJ: 9550 VSS Steering Stabilizer Mount Bracket Kit mounts your 9550 VSS Steering Stabilizer to the aluminum hex tie rod and drag link tubing used in our TJ: High Steer Systems.

Référence : 53-JS-6099

60 Steering Arm.

Référence : 53-JS-6118

TJ Sway Bar Mount. TeraFlex TJ: High Steer Sway Bar Mounts raise the Front Sway Bar up for more clearance for new High Steer components. Mounts are laser cut and formed from 3/8” steel for durability and strength.

Référence : 53-JS-6130

JK HD Ball Joints. TeraFlex JK: HD Ball Joints are engineered to handle the increased load caused by oversized tires and offset wheels. Fits all JK Wrangler/Unlimited models with Dana 30 or Dana 44 front axles.

Référence : 53-JS-6112