Paiement PayPal en 4 fois pour vos pièces Jeep
-
2.5" Lift Kit w/ Fox Shocks; 18-20 Wrangler JL, 4Dr
This 2.5 inch lift kit from Alloy USA fits 4 door 18-20 Jeep Wrangler Unlimited JLU. Includes Fox shock absorbers.Référence : 52-JS-9086
HT : 2 085,40 € TTC : 2 502,48 € -
Ring and Pinion, 4.10 Ratio, Short, Front; 97-06 TJ/ZJ, for Dana 30
This 4.10 ratio ring and pinion from Alloy USA fits Dana 30.Référence : 52-JS-9732
HT : 256,65 € TTC : 307,98 € -
Suspension Ball Joint Kit, 4 Piece, Heavy Duty; 72-91 CJ/SJ
This 4 piece heavy-duty Ball Joint Kit from Alloy USA fits 72-86 Jeep CJ and 74-91 Jeep SJ. Includes 2 upper and 2 lower ball joints.Référence : 52-JS-8130
HT : 256,50 € TTC : 307,80 € -
Ring and Pinion, 4.10 Ratio, Front; 84-95 Jeep XJ/YJ, for Dana 30
This 4.10 ratio ring and pinion gear set fits 84-91 Jeep Cherokee and 87-95 Wrangler with Dana 30 front axle. Uses eight 3/8 inch ring gear bolts.Référence : 52-JS-9853
HT : 256,65 € TTC : 307,98 € -
Axle Shaft, Rear; 70-81 GM 1/2 ton 2WD Pickup/SUV, GM-T 12 Bolt Axles
This 30 spline left or right rear axle shaft from Alloy USA fits GM-T 12-Bolt axles in 70-81 GM 1/2 ton 2WD Pickup and SUVs. 31.312" Long.Référence : 52-JS-8257
HT : 166,68 € TTC : 200,02 € -
Ring and Pinion Kit, 4.56 Ratio; 07-18 Jeep Wrangler, for Dana 30/44
This ring and pinion kit from Alloy USA fits 07-18 Jeep Wrangler. Includes a pair of 4.56 ratio ring and pinion gear sets and master overhaul kits.Référence : 52-JS-9928
HT : 1 154,82 € TTC : 1 385,78 € -
Axle Shaft, Rear, Semi-Float, ABS; 99-05 Grand Cherokee, for Dana 44
This rear axle shaft from Alloy USA fits 99-01 Jeep Grand Cherokee WJ with Dana 44 rear axle.Référence : 52-JS-8350
HT : 463,11 € TTC : 555,73 € -
Axle Shaft Kit, Rear; 65-75 Chevrolet Chevelle/Camaro/Nova, GM 10 Bolt
This 28 spline rear axle kit from Alloy USA fits GM 8.2"/8.5" 10 Bolt axles found in 65-67 Chevrolet Chevelle, 67-69 Camaro, and 70-75 Nova.Référence : 52-JS-8486
HT : 333,66 € TTC : 400,39 € -
Brake Rotor Kit, Front, Drilled/Slotted; 90-99 XJ/WJ/YJ/TJ
This pair of 12 inch drilled and slotted front disc brake rotors fits 90-99 Jeep 4WD Cherokee XJ, 93-98 Grand Cherokee WJ, 90-99 Wrangler YJ/TJ.Référence : 52-JS-9602
HT : 192,38 € TTC : 230,86 € -
Ring and Pinion, 4.88 Ratio, Reverse; 55-12 Chrys/GM/Ford, for Dana 60
This 4.88 ratio reverse ring and pinion from Alloy USA fits Dana 60.Référence : 52-JS-9765
HT : 320,82 € TTC : 384,99 € -
Axle Shaft, Rear; 72-75 Jeep CJ5/CJ6/DJ5/Commando, for Dana 44
This 30 spline left or right rear axle shaft fits Dana 44 axles in 72-75 Jeep CJ-5, CJ-6, DJ-5, and Commando. 5x5.5" bolt pattern. 24.75" Long.Référence : 52-JS-8203
HT : 230,99 € TTC : 277,19 € -
Ring and Pinion, 4.88 Ratio, Turbo; 03-18 Toyota Truck/SUV, 8 Inch, V6
Toyota 8 (200Mm) 4.88 V6/Turbo by Alloy USARéférence : 52-JS-9887
HT : 256,65 € TTC : 307,98 € -
Axle Locking Hub Conversion Kit, Manual; 84-95 Jeep YJ/XJ, for Dana 30
This manual locking hub conversion kit for Dana 30 from Alloy USA fits 84-91 Jeep Cherokee XJ, 87-95 Wrangler YJ. Cannot be used with lockers.Référence : 52-JS-8298
HT : 1 924,98 € TTC : 2 309,98 € -
Differential Cover, Aluminum, Red, for Dana 30
This high strength cast aluminum red differential cover from Alloy USA fits Dana 30 axles.Référence : 53-JS-0694
HT : 115,32 € TTC : 138,38 € -
Axle Shaft, Front, Right, Inner; 78-79 Ford F-250/F-350, for Dana 60
This 35 spline Dana 60 front right inner axle shaft from Alloy USA fits 78-79 Ford F-250/F-350. 34.56" long. Requires 35 spline carrier upgrade.Référence : 52-JS-8405
HT : 282,32 € TTC : 338,78 € -
Master Overhaul Kit; 67-88 GMC/Chevrolet Truck, 10.5 Inch Axles
Master Overhaul Kit 1987-GM by Alloy USARéférence : 53-JS-0701
HT : 230,99 € TTC : 277,19 € -
Axle Shaft, Front, Right, Inner; 08-18 Jeep Wrangler JK, for Dana 44
This 30 spline chromoly front right inner axle shaft from Alloy USA fits Dana 44 axles found in 08-18 Jeep Wrangler JK/JKU Rubicon.Référence : 52-JS-8411
HT : 256,65 € TTC : 307,98 € -
4" Lift Kit w/Fox Shocks, w/Arms; 18-20 JL, 4Dr
This 4" lift kit with Fox shocks and control arms by Alloy USA fits 18-20 Jeep Wrangler JL 4Door.Référence : 52-JS-9092
HT : 3 208,31 € TTC : 3 849,97 € -
Ring and Pinion, 4.09 Ratio; 48-91 Willys/Jeep, for Dana 44
This 4.09 ratio ring and pinion from Alloy USA fits Dana 44.Référence : 52-JS-9738
HT : 263,07 € TTC : 315,69 € -
Axle Wheel Hub, 30 Spline; 00-06 Jeep Wrangler TJ, for Dana Grande 30
This 30 spline front unit bearing from Alloy USA is designed to work with Grande 30 axle shafts, fits 00-06 Jeep Wrangler.Référence : 52-JS-8146
HT : 192,38 € TTC : 230,86 € -
Ring and Pinion, 3.73 Ratio, Reverse; 48-91 Willys/Jeep, for Dana 44
This 3.73 ratio reverse ring and pinion from Alloy USA fits Dana 44.Référence : 52-JS-9860
HT : 256,65 € TTC : 307,98 € -
Axle Shaft, Rear, Right; 99-04 Jeep Grand Cherokee WJ, for Dana 44
This 30 spline rear right axle shaft from Alloy USA fits Dana 44 axles in 99-04 Jeep Grand Cherokee with Hydra-loc. 29.375" Long.Référence : 52-JS-8264
HT : 218,07 € TTC : 261,68 € -
Ring and Pinion, 5.38 Ratio, Rear; 07-18 Wrangler JK/JKU, for Dana 44
This 5.38 ratio ring and pinion gear set from Alloy USA fits 07-18 Jeep Wrangler with Dana 44 rear axle. Uses ten 7/17 or 1/2 inch ring gear bolts.Référence : 52-JS-9941
HT : 256,65 € TTC : 307,98 € -
Axle Shaft, Rear, 4WD; 80-84 Dodge Pickup/Ram Charger, Chrysler 9.25
This 31 spline left or right rear axle shaft fits Chrysler 9.25" axles in 80-84 4WD Dodge Pickup and RAM Charger before 3/31/84. 31.625" Long.Référence : 52-JS-8356
HT : 128,32 € TTC : 153,99 € -
Axle Shaft Kit, 30 Spline; 84-06 Jeep Wrangler/Cherokee, for Dana 30
This 30 spline unit bearing and outer axle shaft kit from Alloy USA fits 84-06 Jeep Cherokee and Wrangler with Dana 30 front axle. Must use 00-06 Wrangler front brake rotors.Référence : 52-JS-8491
HT : 834,15 € TTC : 1 000,98 € -
Ring and Pinion Kit, 3.73 Ratio; 97-06 Jeep Wrangler, for Dana 30/35
This 3.73 ratio ring and pinion with master install kit from Omix services Dana 30 front and Dana 35 rear found in 97-06 Wrangler TJRéférence : 52-JS-9659
HT : 834,15 € TTC : 1 000,98 € -
U-Joint Snap Ring, 1.188 Inch Cap, 1/16 ring width
This full circle snap ring from Alloy USA fits U-Joints with a 1.188 inch size cap and a 1/16 inch snap ring width.Référence : 52-JS-4684
HT : 4,98 € TTC : 5,98 € -
Ring and Pinion, 3.73 Ratio, 10 Bolt; 71-97 GM Car/Truck/SUV, 8.5 Inch
GM 8 1/2-3.73 Ring/Pinion by Alloy USARéférence : 52-JS-9771
HT : 288,74 € TTC : 346,49 € -
Axle Shaft, Rear; 76-82 Jeep CJ5/CJ7, for Dana 44
This chromoly rear axle shaft for Dana 44 from Alloy USA fits 76-82 Jeep CJ5 and CJ7. 24.87 inches long.Référence : 52-JS-8211
HT : 230,99 € TTC : 277,19 € -
Ring and Pinion Kit, 4.10 Ratio; 97-06 Wrangler, for Dana 44/44
This 4.10 ratio ring and pinion with master install kit from Omix services Dana 44 front and Dana 44 rear axles found in 97-06 Wrangler TJRéférence : 52-JS-9892
HT : 834,15 € TTC : 1 000,98 € -
Axle Shaft Kit, Front; 92-06 Wrangler/Cherokee, for Dana Grande 30
This 30 spline Dana 30 Grande front axle shaft conversion kit from Alloy USA fits 92-01 Jeep Cherokee, 97-06 Wrangler, and 04-06 Wrangler LJ. Must use 00-06 Wrangler front brake rotors.Référence : 52-JS-8304
HT : 834,15 € TTC : 1 000,98 € -
Axle Shaft, Rear, Left, Non C-Clip; 84-90 YJ/XJ, for Dana Grande 35
This 30 spline rear left axle shaft from Alloy USA fits non C-Clip Dana 35 Grande axles in 84-90 Jeep Cherokee and Wrangler. 30.354" Long.Référence : 52-JS-8309
HT : 192,49 € TTC : 230,99 € -
Master Overhaul Kit; 92-97 GM Yukon, 9.5 Inch Axles
Master Overhaul Kit GM 9.5 by Alloy USARéférence : 53-JS-0709
HT : 230,99 € TTC : 277,19 € -
Axle Shaft, Front, Right, Inner; 80-92 Jeep Wagoneer SJ, for Dana 44
This 30 spline Dana 44 chromoly front right inner axle shaft from Alloy USA fits 80-92 Jeep SJ Wagoneer. 32.12" long.Référence : 52-JS-8422
HT : 230,99 € TTC : 277,19 € -
Suspension Lift Kit, 2.5 Inch, Shocks; 07-18 Jeep Wrangler JKU, 4 Door
This 2.5 inch lift kit from Alloy USA fits 4 door 07-18 Wrangler Unlimited JKU. Includes gas shock absorbers.Référence : 52-JS-9116
HT : 673,74 € TTC : 808,49 € -
Ring and Pinion, 4.10 Ratio; 55-12 Chrysler/GM/Ford, for Dana 60
This 4.10 ratio ring and pinion from Alloy USA fits Dana 60.Référence : 52-JS-9743
HT : 320,82 € TTC : 384,99 € -
Axle Shaft, Rear, Left, C-Clip; 93-97 Ford Ranger, 8.8 Inch Axles
This 28 spline rear left axle shaft from Alloy USA fits Ford 8.8" C-Clip axles found in 93-97 Ford Ranger. 30.125" long.Référence : 52-JS-8170
HT : 153,98 € TTC : 184,78 € -
Ring and Pinion, 4.56 Ratio; 99-05 Excursion/F250/F350, for Dana 50
This 4.56 ratio ring and pinion from Alloy USA fits Dana 50.Référence : 52-JS-9865
HT : 320,82 € TTC : 384,99 € -
Axle Shaft, Rear, Right; 94-98 Jeep Grand Cherokee ZJ, for Dana 44
This 30 spline rear right axle shaft from Alloy USA fits Dana 44 axles in 94-98 Jeep Grand Cherokee with rear disc brakes and ABS. 29.25" long.Référence : 52-JS-8269
HT : 192,49 € TTC : 230,99 € -
Master Overhaul Kit; 1963-1987 Ford Truck/SUV, 9 Inch Axles
Master Overhaul Kit; 1982 Ford by Alloy USARéférence : 53-JS-0374
HT : 153,98 € TTC : 184,78 € -
Axle Shaft, Rear; 71-80 International Scout II, for Dana 44
This 30 spline left or right rear axle shaft from Alloy USA fits Dana 44 axles in 71-80 International Scouts II. 28.25" long.Référence : 52-JS-8363
HT : 230,82 € TTC : 276,98 € -
Axle Shaft Kit, Front; 07-18 Jeep Wrangler JK/JKU, for Dana 30
This Dana 30 chromoly front left and right axle shaft kit from Alloy USA fits 07-18 Jeep Wrangler.Référence : 52-JS-8496
HT : 1 026,57 € TTC : 1 231,88 € -
Ring and Pinion Kit, 4.10 Ratio; 97-06 Wrangler, for Dana 30/44
This 4.10 ratio ring and pinion with master install kit from Omix services Dana 30 front and Dana 44 rear axles found in 97-06 Wrangler TJRéférence : 52-JS-9667
HT : 834,15 € TTC : 1 000,98 € -
Wheel Adapter Kit, 5x4.5-5x5; 05-18 Wrangler/Grand Cherokee/Commander
This pair of red 1.25 inch aluminum wheel adapters from Alloy USA let you install 5x5 inch wheels onto Jeeps with a 5x4.5 inch bolt pattern.Référence : 52-JS-4763
HT : 128,25 € TTC : 153,90 € -
Ring and Pinion, 4.56 Ratio, Short; 93-97 F150/F250, 10.25 Inch Axles
Ford 10 1/4-4.56 Ring/Pinion by Alloy USARéférence : 52-JS-9777
HT : 560,52 € TTC : 672,62 € -
Axle Shaft, Rear, 28 Spline; 94-98 Ford Mustang, 8.8 Inch Axles
This 28 spline chromoly rear axle shaft from Alloy USA fits Ford 8.8" axles found in 94-98 Mustang. 29.937" long.Référence : 52-JS-8220
HT : 166,68 € TTC : 200,02 € -
Ring and Pinion Kit, 3.73 Ratio; 97-06 Wrangler, for Dana 44/44
This 3.73 ratio ring and pinion with master install kit from Omix services Dana 44 front and Dana 44 rear axles found in 97-06 Wrangler TJRéférence : 52-JS-9900
HT : 834,15 € TTC : 1 000,98 € -
Axle Shaft, Rear; 74-86 Ford E-150/F-150, 9 Inch Axles
This 31 spline chromoly left or right rear axle shaft from Alloy USA fits 74-86 Ford 9" axles found in E-150/F-150. 37.864" long.Référence : 52-JS-8226
HT : 166,68 € TTC : 200,02 €
Liste des véhicules
- Willys MB, M201, CJ2, CJ3
- Jeep CJ - CJ5, CJ6, CJ7, CJ8
- Wrangler YJ
- Wrangler TJ
- Wrangler JK
- Wrangler JL
- Gladiator JT
- Comanche MJ
- Cherokee XJ
- Cherokee Liberty KJ
- Cherokee Liberty KK
- Cherokee KL
- Grand Cherokee ZJ / ZG
- Grand Cherokee WJ / WG
- Grand Cherokee WH / WK
- Grand Cherokee WL / WK2
- Commander XK
- Patriot MK
- Compass MK
- Compass MP
- Cherokee SJ
- Renegade BU / BV
- Autres véhicules
Jeep
