RT Off-Road

Equip your vehicle with a low-profile LED Light Bar by RT Off-Road. Each lamp is constructed of an aluminum body. The 48 Nichia LEDs in each lamp produce 19200 lumens at only 144 watts, resulting in an impressive amount of light without the need to upgrade the charging system of the vehicle. Matte black anodization, an IP86 rating, and a 50,000 hour LED bulb life means that these lamps are designed to last, even in the harshest conditions. Every aspect of product design, manufacturing, and assembling takes place in the USA. Included is a light bar measuring 51.63″ x .75″ x 1.5″, roof light mount brackets with hardware, a wiring harness, and a switch.

Référence : 51-JS-5941

Set of 1.5″ Thick Gloss Black Anodized Wheel Adapters; Adapts 5 On 4.5″ to 5 on 5.5″; Includes 2 Wheel Adapters and 10 Wheel Nuts; For Replacement Wheel Stud Order RT32017.

Référence : 51-JS-6854

Référence : 51-JS-6619

Protect your soft top with RT Off-Road's Soft Top Storage Sleeve. Installs quickly and easily on top with no special tools. Available in multiple colors for a direct match to soft top material.

Référence : 51-JS-6402

Complete Front Performance Kit Including 2 Drilled & Slotted Rotors, Pad Set and All Hardware.High Performance Brake Rotors from RT Off-Road are designed for the most extreme abuse. These Brake Rotors were tested on: the steep descents in Moab, UT; stop and go traffic in Boston, MA; and the long range treks in-between. Each brake rotor is machine slotted and cross drilled to provide maximum cooling. This drastic cooling helps eliminate brake fade and potential warping. The design rapidly expels friction gases, debris, and water from the rotor and pad surface. You can expect greater braking response, increased performance, longer life, and a sporty new look.

Référence : 51-JS-6918

Polished Stainless Steel Door Side Hinge Set; Includes 4 Door Side Hinges and Hardware.

Référence : 51-JS-6431

Référence : 51-JS-6751

Cover a dented or rusty factory rear bumper with an RT Off-Road stainless steel Rear Bumper Overlay. Each bumper is manufactured of stainless steel and then polished to a brilliant finish. Bumper overlay includes all the bolt holes necessary to mount it to the vehicle and requires no drilling.

Référence : 51-JS-6495

Improve the looks of any JK Wrangler with an LED Tail Light Set from RT Off-Road. These tail lights are a plug-and-play design without the need for anti-flicker or hyper flash modules to function properly. Each light features 36 LEDs for improved bulb life over the OE incandescent bulbs and increased brightness. They feature clear lenses with black bezels. Also available with red lenses.

Référence : 51-JS-6955

Includes Left and Right Surrounds; Constructed of Aluminum with Plastic Ends; Black.RT Off-Road's Door Surround Kit is a direct fit replacement for the factory door surround. Our door surrounds are able to fit both factory soft tops, replacement tops and bowless sot tops. Includes all hardware needed for installation and instructions.

Référence : 51-JS-6815

Protect high-dollar differentials with a Heavy Duty Differential Cover from RT Off-Road. These covers are constructed of 3/8″ high grade forged steel with a raised fill plug for extra oil capacity. They feature strengthening ribs to ensure a broken or peeled differential cover doesn't cut the day short. The mating surface is machined flat to ensure a leak-free fitment. All covers are finished in a red powder coat and includes flanged hex bolts, recessed fill plug and RTV.

Référence : 51-JS-7060

Heavy Duty Rear Bumper w/ Hitch; Includes 2 Flush-Mount LED Lamps & 2 D-Rings; Textured Black Powder Coat Finish; Includes Mounting Hardware and Mounting Bracket.

Référence : 51-JS-5835

Includes: Shifter Bezel, Steering Wheel Accents, HVAC Vent Accents, Tweeter Covers, Cup Holder Accent, Dash Grab Handle Cover, Front Door Accents, Rear Door Accents, Door Handle Accents and Center Dash Accents.

Référence : 51-JS-6587

RT Off-Road's upgraded Sway Bar Links are an affordable upgrade that increases performance and handling. Not only will your vehicle perform better with our upgraded polyurethane bushing and boots, but the product will last longer than the factory rubber pieces it replaces. All sway bar links install in place of the factory link.Black powder coated body with blue polyurethane boots and bushings; Polyurethane bushings provide long lasting performance and handling; Installs using factory hardware.

Référence : 51-JS-5973

RT Off-Road's Clear Light Kits are a DOT-legal way to give the vehicle an all new look. These crystal clear lenses come complete with amber bulbs. The bulbs and lenses included in our kit will install directly into the factory wiring harnesse and body. Installation requires no modifications to the body and can be completed with basic hand tools. Includes left and right side marker lamps and two (2) amber bulbs.

Référence : 51-JS-6886

Replace The Factory Plastic Brush Guard With a Heavy Duty Plate Steel Skid Plate. Keep The Electronic Sway Bar Disconnect and Steering Components Safe From Rocks, Brush and Any Potential Contact. Direct Bolt In Design Using Existing Holes. No Drilling Required. Installs With Basic Hand Tools.

Référence : 51-JS-6712

RT Off-Road's Combo Beach Toppers allow occupants to enjoy the open air feel while staying protected from direct sunlight and unexpected rain showers. Each kit is designed to be a versatile system, allowing partial or full interior coverage. Windshield channels may be required and are sold separately.

Référence : 51-JS-6463

Black; Includes Two (2) 6″ Round Mirrors, 2 Arms, 2 Brackets and All Necessary Hardware.RT Off-Road's Quick Release Mirrors are a great solution for those who want to drive without doors, but require side view mirrors. The gloss black powder coated brackets mount directly to the side of the upper windshield hinge. The included mirror arms and heads attach to the brackets with a thumb screw to allow for a quick release.

Référence : 51-JS-6783

Stainless Steel Instrument Overlay w/ Radio Opening.

Référence : 51-JS-6527

LED Block Lamp and Harness Kit; Equip your vehicle with low-profile LED Block Lamps by RT Off-Road. Each lamp is constructed of an aluminum body. The 6 Nichia LEDs in each lamp produce 2400 lumens at only 18 watts, resulting in an impressive amount of light without the need to upgrade the charging system of the vehicle. Matte black anodization, an IP86 rating, and a 50,000 hour LED bulb life means that these lamps are designed to last, even in the harshest conditions. Every aspect of product design, manufacturing, and assembling takes place in the USA. Included is a pair of block lamps measuring 3.5″ x 4.5″ x .75″, a pair of mounting brackets with hardware, windshield light mount brackets with hardware, a wiring harness for a pair of lamps, and a switch.

Référence : 51-JS-6987

Remove the doors from a Jeep without removing mirrors with RT Off-Road's Mirror Relocation Brackets. In this kit are 2 brackets that install into existing holes in the windshield frame. Includes 2 Brackets, 2 Spacers and 2 Washers.

Référence : 51-JS-6534

Référence : 51-JS-8113

Référence : 51-JS-8118