Transmission

TJ Output Yoke. This replacement TJ: Rear Output Yoke fits the tail shaft of the TeraFlex TJ: NP231 Extreme Short Shaft Kit (# 4444400).

Référence : 53-JS-6064

TJ–XJ Brake Cable. These TeraFlex Emergency Brake Cables are the same ones included in our TJ: Rear Disc Brake Conversion. They also fit the TJ Wrangler model’s factory rear disc brakes as well as our 1991-06 Dana / Chrysler: Rear Disc Brake Conversion Kit.

Référence : 53-JS-6037

5/8” Upper Stud . The replacement 5/8” Upper Stud is required to secure the Front Sway Bar Quick Disconnect Link for highway use.

Référence : 53-JS-6068

JK Brake Rotor–Front. This TeraFlex JK: 13.3” Front Smooth & Vented Brake Rotor is a direct replacement for either front brake rotor in our Front Big Brake Kit w/ Smooth Rotors (# 4303400) and Front Performance Big Rotor Kit w/ Smooth Rotors (# 4303480).

Référence : 53-JS-6033

TJ Tie Rod End. These heavy duty TeraFlex TJ: Tie Rod Ends utilize a Dodge Dana 60 joint end, while the offset large taper end fits a standard Dana 60 or Tera60 front axle.

Référence : 53-JS-6060

TJ Tie Rod End. These heavy duty TeraFlex TJ: Tie Rod Ends utilize a Dodge Dana 60 joint end, while the large taper end fits a standard Dana 60 or Tera60 front axle.

Référence : 53-JS-6055

JK Axle Bracket. TeraFlex JK: Tera CRD60 Axle Brackets ensure correct suspension geometry on Tera CRD60 front axle housings.

Référence : 53-JS-6026

JL–JT 3.6L PCV Kit. The TeraFlex JL / JT 3.6L: Crankcase Vent System Kit (CVS) prevents oil from being drawn into the intake while driving on extreme inclines. Adds a second PCV valve to the front of the engine via an oil fill cap adapter and a T-fitting.

Référence : 53-JS-6047

JK Axle Bracket. TeraFlex JK: Tera60 Front Axle Brackets ensure correct suspension geometry on a Dana 60 style front axle housing with 3.25” diameter axle tubes.

Référence : 53-JS-6080

Threaded Insert.

Référence : 53-JS-6028

JK HD Adjustable Tire Carrier Mount Base Plate Kit.

Référence : 53-JS-6046

JK Dana 60 Mount . TeraFlex JK: Tera60 Front Axle Brackets ensure correct suspension geometry on a Dana 60 style front axle housing with 3.25” diameter axle tubes.

Référence : 53-JS-6079

TJ Long Arm Bracket. On higher lifts, our Pro LCG 4-Link Long Control Arms, Frame Brackets, and Rear Axle Truss convert the stock 5-link rear suspension to a triangulated 4-link suspension for increased flex while eliminating interference with other components.

Référence : 53-JS-6085

JK Dana 60 Mount. TeraFlex JK: Tera60 Front Axle Brackets ensure correct suspension geometry on a Dana 60 style front axle housing with 3.25” diameter axle tubes.

Référence : 53-JS-6081

JK Axle Bracket.

Référence : 53-JS-6020

JK Brake Rotor –Rear. This TeraFlex JK: 13.5” Rear Left Slotted Brake Rotor is a direct replacement for rear left brake rotor in our Rear Performance Big Rotor Kit w/ Slotted Rotors (# 4304460).

Référence : 53-JS-6044

Threaded Insert.

Référence : 53-JS-6029

JK CV Yoke – Front. TeraFlex JK: High-Angle Rzeppa CV Yokes are required for our High-Angle Rzeppa CV Driveshaft conversions. Includes dust shield.

Référence : 53-JS-6014

TJ Brake Caliper. This TeraFlex TJ: Rear Disc Brake Caliper is a direct replacement for the calipers in our Rear Disc Brake Conversion Kits. Comes ready to install with all seals and O-rings, while the zinc plating resist rust and corrosion.

Référence : 53-JS-6073

Roll Cage Anchor. Use this universal TeraFlex Roll Cage Anchor Plate for custom tube projects.

Référence : 53-JS-6052

JK CV Yoke – Rear. TeraFlex JK: High-Angle Rzeppa CV Yokes are required for our High-Angle Rzeppa CV Driveshaft conversions. Includes dust shield.

Référence : 53-JS-6015

TJ Tapered Insert . This TJ: Tie Rod/Drag Link Stock Tapered Insert Sleeve is used in our Dana 30/44 High Steer Systems and Dana 30/44 High Steer Knuckle. The tapered insert matches the factory TJ tie rod/drag link taper for a simple installation.

Référence : 53-JS-6089

TJ Tie Rod End. These heavy duty TeraFlex TJ: Tie Rod Ends utilize a Dodge Dana 60 joint end, while the large taper end fits a standard Dana 60 or Tera60 front axle.

Référence : 53-JS-6054