Autres produits

JK Knuckle Gusset . TeraFlex JK: Front Axle Inner Knuckle Gusset Kits reinforce the weak knuckles on JK Wrangler/Unlimited Dana 30 or Dana 44 factory axles. This prevents unwanted bending or breaking under extreme conditions.

Référence : 53-JS-5904

JK Yoke U-Bolt. The TeraFlex JK: Yoke U-Bolt Conversion Kit replaces the OEM Rzeppa CV flange with a standard 1310 CV cardan joint style yoke and U-bolt style connector to run a CV style (double cardan) driveshaft.

Référence : 53-JS-5862

Drive Flange Kit. The TeraFlex Dana 60: Drive Flange Kit eliminates the lockout hub for continuous engagement. The drive flange is machined from a solid block of high-quality gear steel for ultimate strength, while the cap is machined from aluminum.

Référence : 53-JS-5813

Spline Drive Lug Nut. Spline drive lug nuts maximize thread engagement, increase wheel security, and improve appearance. Works with aftermarket wheels requiring a smaller outside diameter lug nut. Includes a splined security key.

Référence : 53-JS-5796

JK4 Rear Driveshaft. TeraFlex High-Angle Rzeppa CV Driveshafts combine the smooth torque transfer of a CV joint with the high-angle misalignment of a traditional U-joint. Designed for the extreme angles associated with larger lift heights.

Référence : 53-JS-5879

Differential Cover. Beef up your axle housings with one of our Dana HD Differential Covers. TeraFlex heavy-duty differential covers withstand trail carnage caused by rocks, debris, and other obstacles.

Référence : 53-JS-5858

Hand Throttle Cable. The universal TeraFlex Hand Throttle Cable Kit provides constant idle or speed when off-roading, which is especially useful when the gas, clutch, and brake are needed together. Works with all engines with a cable-operated throttle.

Référence : 53-JS-5899

Differential Cover. Beef up your axle housings with one of our Dana HD Differential Covers. TeraFlex heavy-duty differential covers withstand trail carnage caused by rocks, debris, and other obstacles.

Référence : 53-JS-5859

JK2 Rear Driveshaft. TeraFlex High-Angle Rzeppa CV Driveshafts combine the smooth torque transfer of a CV joint with the high-angle misalignment of a traditional U-joint. Designed for the extreme angles associated with larger lift heights.

Référence : 53-JS-5877

Differential Cover. Beef up your axle housings with one of our Dana HD Differential Covers. TeraFlex heavy-duty diff covers withstand trail carnage caused by rocks, debris, and other obstacles.

Référence : 53-JS-5854

JK Window Holder. Securely mount your Soft Top Windows to your garage wall with this Hanger Kit.

Référence : 53-JS-5809

JK Axle Sleeve Kit. TeraFlex JK: Front Axle Inner Sleeve Kits reinforce the weak axle tubing on JK Wrangler/Unlimited Dana 30 or Dana 44 factory axles. This prevents unwanted bending or breaking under extreme conditions.

Référence : 53-JS-5903

JK Tera44 Shaft Kit. Replace your weak stock front axle shafts with a set of heavy-duty TeraFlex Axle Shafts! Comes assembled with our 32-spline Front Outer Stub Shafts and Spicer 1350-Series (Rubicon) U-Joints. Complete kit includes both sides.

Référence : 53-JS-5821

Wheel Adapters –5x5”. These TeraFlex 1.25” Wheel Offset Adapters provide 1.25” offset for factory wheels for additional tire clearance when turning. Works with 8” wide or wider wheels with 4” or less backspacing. Made from 6061-T6 aluminum.

Référence : 53-JS-5800

JK Tire & LightMount. Use these Spare Tire Relocation and 3rd Brake Light Extension Brackets to mount a larger spare tire to the rear tailgate while maintaining DOT compliance. Fits up to a 35” tire.

Référence : 53-JS-5901

JT Driveshaft Lower. The TeraFlex JT: 1.5” Rear Driveshaft Lowering Kit lowers the rear driveshaft center support mount to improve driveshaft angles during full droop. Especially important on JT Gladiator models with extended-travel Falcon Shocks.

Référence : 53-JS-5883

JK Sleeve & Gusset. TeraFlex JK: Front Axle Inner Sleeve & Inner Knuckle Gusset Kits reinforce the weak axle tubing and knuckles on JK Wrangler/Unlimited Dana 30 or Dana 44 factory axles. This prevents unwanted bending or breaking under extreme conditions.

Référence : 53-JS-5905

JT Uinta Anchor Kit. Secure your toys in the bed of your JT Gladiator pickup with these innovative TeraFlex JT: Uinta Cargo Tie-Down Anchors. Constructed from a combination of stainless-steel and anodized aluminum for superior strength. Sold in pairs.

Référence : 53-JS-5896

Sensor/Line Plug Kit. Our Locker Sensor Plug & Air Line Actuator Plug Kit is a must when using an aftermarket locker in a Tera44 or Rubicon-style front axle housing. Works with all aftermarket lockers.

Référence : 53-JS-5865

TJ Axle Bracket. Use the TeraFlex TJ: High Steer Front Track Bar Axle Bracket Kit to correct bump steer and eliminate other front-end issues on TJ Wrangler/Unlimited models with 3.5-6” lifts and a High Steer System. Requires additional components.

Référence : 53-JS-5812

JK Tera30 Shaft Kit. Replace your weak stock front axle shafts with a set of heavy-duty TeraFlex Axle Shafts! Comes assembled with our 32-spline Front Outer Stub Shafts and Spicer 1350-Series (Rubicon) U-Joints. Complete kit includes both sides.

Référence : 53-JS-5817

JK Rubn44Shaft–Right. Replace your weak stock front axle shafts with a set of heavy-duty TeraFlex Axle Shafts! Comes assembled with our 32-spline Front Outer Stub Shaft and Spicer 1350-Series (Rubicon) U-Joint.

Référence : 53-JS-5848

JK Alta Cargo Rack. Increase storage space for extended overland adventures with the JK Alta Cargo Rack. This rack bolts to our Alpha HD Hinged Spare Tire Carrier (NOT INCLUDED) to keep your supplies above harm’s way.

Référence : 53-JS-5894