Catalogue de Pièces et Accessoires RT Off-Road pour Jeep

Equip your vehicle with a Grille and LED Light Bar Kit by RT Off-Road. Each grille is constructed of 1/4″ CNC Machined aluminum with a matte black anodized finish. The included Light Bar features 18 Nichia LEDs that produce 7200 lumens at only 54 watts, resulting in an impressive amount of light without the need to upgrade the charging system of the vehicle. Matte black anodization, an IP86 rating, and a 50,000 hour LED bulb life means that these lamps coupled with the powder coated grille shows that these products are designed to last, even in the harshest conditions. Every aspect of product design, manufacturing, and assembling takes place in the USA. Included is a grille with LED Light Mount, grille mounting hardware, a wiring harness, and a switch. The grille is a cut-to-fit design.

Référence : 51-JS-5939

Référence : 51-JS-6547

Référence : 51-JS-5836

Année(s) : 18-

Référence : 51-JS-6941

Année(s) : 99-04

N° vue éclatée : 0322

Pare-chocs avant stubby treuil "IronForce Stubby S" FLJ Offroad pour Jeep Wrangler JL et Wrangler JL Unlimited – Manilles + supports LED

Référence : 51-JS-5837

Kit conversion "Performance" mastervac avec maitre cylindre de frein pour Jeep CJ5, CJ7, CJ8 et Wrangler YJ sans système d'ABS

Référence : 51-JS-6946

Année(s) : 76-95

N° vue éclatée : 0398

Protect your spare tire from the elements with an RT Off-Road Tire Cover. The elastic slip on design allows for easy installation while still maintaining a tight fit. The canvas material protects expensive tire and wheel combinations from corrosive road chemicals, salts and UV light.

Référence : 51-JS-6444

Full Car Cover; 3 Layer Gray; Water Resistant; Includes Lock, Cable and Storage Bag.Rt Off-Road's Full Covers Are Designed To Protect The Vehicle From Sun, Dirt, Dust, Moisture And Pollution. The 3-Layer Water Resistant Cover Accomplishes This While Also Being Breathable Enough To Reduce Moisture And Temperature Buildup. Includes Cover, Lock, Cable And Storage Bag.

Référence : 51-JS-6415

Pare-chocs arrière en acier FLJ Offroad "IronForce" avec attelage carré US, LED intégrées et 2 manilles pour Jeep Wrangler JL et Wrangler JL Unlmited.

Référence : 51-JS-5835

Année(s) : 18-

Référence : 51-JS-6927

Année(s) : 99-04

Référence : 51-JS-6614

Année(s) : 87-98

Includes Dual Piston Calipers w/ 54mm Pistons, Caliper Brackets, 13″ Diameter Drilled & Slotted Rotors, Pads and All Required Hardware For Installation.Rotors Are Drilled For a 5 On 5″ Bolt Pattern; 17-inch Wheels Are Required For Installation; 22% Shorter 60-0 Distance.22% Shorter 60-0 Distance; 42% Increase In Caliper Piston Area; 15% Increase In Brake Pad Contact Patch; 9% Larger Brake Rotor; 10% Larger Brake Pad Surface Area On Rotor; 9% Increase In Leverage.Larger Bore Master Cylinder (Replacement Part #: 68091278AB) Also Suggested For Better Brake Pedal Feel and Improved Braking Performance.Note: This Kit Will Not Work on JK's with "Moab" Wheels (Identified By 5 Large Spokes) Without Wheel Spacers.

Référence : 51-JS-6917

Référence : 51-JS-6818

Référence : 51-JS-6770

Référence : 51-JS-6815

Année(s) : 07-18

RT Off-Road's Double Tube Bumper is sure to freshen up the look of your vehicle. All tube bumpers are constructed out of 3″ diameter tubing and finished in a durable powder coated finish. These tube bumpers are designed to install in the factory holes and require no additional drilling or modifications.

Référence : 51-JS-8130

Black Powder Coated Stainless Steel Tail Lamp Guard Set; Includes 2 Guards and Hardware.

Référence : 51-JS-6721

Référence : 51-JS-6915

Année(s) : 84-01

N° vue éclatée : 0398

Improve steering performance with RT Off-Road's Drop Pitman Arm. Lifting your Jeep without addressing the steering angles oftentimes results in bump steer and decreased turning radius. Installation of this drop pitman arm will reduce the operating angle of the drag link, resulting in improved steering feel and less wear on steering parts. Each arm is designed to bolt in place of the factory piece with no interference issues.

Référence : 51-JS-6967

Replace damaged or missing upper door frames with RT Off-Road's replacement door frame sets. Replacement upper door frames fit all factory half doors and work with our replacement door skins (sold separately). Door frames are sold in pairs.

Référence : 51-JS-6992

1.5″ Wide Wheel Spacer Set with a 5 on 5″ Bolt Pattern; Includes 2 Gloss Black Anodized Wheel Spacers and 10 Wheel Nuts.Achieve an aggressive look and improved stability with a Wheel Spacer Kit from RT Off-Road. These 1.5″ thick spacers are an affordable option to add additional backspacing or expand the wheel options in on a specific vehicle. Each Wheel Spacer starts as a 6061 T6 Aluminum blank and is then machined to be hub-centric and wheel-centric to ensure proper fitment. They are finished in anodized black to ensure a long lasting life.For Replacement Wheel Stud Order RT32017.

Référence : 51-JS-6860

RT Off-Road's Clinometer is a useful asset when bringing a Jeep through the toughest terrain on the planet. The illuminated roll and pitch gauges with CJ graphics can be used to ensure the Jeep stays rubber side down no matter the obstacle. Attaches via the included heavy duty double-sided tape.Features Roll and Pitch Gauges with CJ Graphics; Mounts Via Heavy Duty Double-Sided Tape; Backlit.

Référence : 51-JS-6604

These durable polycanvas seat covers are custom made for a snug fit. The front seat covers have a built-in side air bag pocket for added safety. There are zippered mesh pockets on the front and sides of the seat for convenient storage. Large rear pockets offer additional storage. Custom fit headrest covers are included. Heavy duty straps and clips make installation easy. Available in Black/Gray only.

Référence : 51-JS-6628