Marque Rough Trail

Référence : 51-JS-6702

Référence : 51-JS-6616

Année(s) : 96-02

N° vue éclatée : 0859

2″ Lift & Level Kit; Includes Front and Rear Strut Spacers, Front Sway Bar Link Brackets, Front Strut To Knuckle Cam Bolts w/ Nuts, Adjustable Rear Upper Lateral Links w/ Polyurethane Bushings and Mounting Hardware.Strut Spacers and Sway Bar Link Brackets Manufactured of 1/4″ Steel and Finished In a Black Powder Coat.

Référence : 51-JS-5832

Jerrican Vert Olive avec Bec Verseur + 2 bouchons (avec joint torique - pour fermeture ou pour ventilation)

Référence : 51-JS-6771

Référence : 51-JS-6770

RT Off-Road's Side Steps will make entering and exiting the vehicle much easier as well as improving side protection from obstacles. Installation is a breeze, using the factory body mounting bolts to mount the steps to the vehicle. Each kit includes left and right steps, mounting brackets, hardware and installation instructions.Durable textured black powder coat finish; No-Slip flats for entering and exiting; 3″ diameter tubes; works with vehicles with or without a body lift; Easy no-drill installation.

Référence : 51-JS-8123

Référence : 51-JS-5990

Jerry Can Cap - Bouchon hermétique pour jerrican

Référence : 51-JS-6769

Black Shorty (13″) Antenna; Direct Replacement of the OE 31″ Long Steel Antenna.

Référence : 51-JS-6711

Set of Two (2) Blue H4 Super Halogen Bulbs; 60 Watts.

Référence : 51-JS-6881

Complete Black Hood Set; Includes Hood Vent Cover, Hood Hinge Set, Hood Catch Kit, Windshield Tow Down Kit and Hardware.

Référence : 51-JS-6833

Année(s) : 76-95

Improve steering performance with RT Off-Road's Drop Pitman Arm. Lifting your Jeep without addressing the steering angles oftentimes results in bump steer and decreased turning radius. Installation of this drop pitman arm will reduce the operating angle of the drag link, resulting in improved steering feel and less wear on steering parts. Each arm is designed to bolt in place of the factory piece with no interference issues.

Référence : 51-JS-6967

Improve the look and off-road performance of your vehicle with RT Off-Road's Lift Kit. These kits lift the vehicle 1-3/4″ (2″ for the Liberty), improving ground clearance allowing the use of oversized tires. Black polyurethane construction. Shocks not included unless noted; Allows for the use of 31″ x 10.50″ Tires.

Référence : 51-JS-6696

Improve the look and off-road performance of your vehicle with RT Off-Road's Lift Kit. These kits lift the vehicle 1-3/4″ (2″ for the Liberty), improving ground clearance allowing the use of oversized tires. Black polyurethane construction. Shocks not included unless noted. Allows for the use of 30″ x 9.50″ Tires.

Référence : 51-JS-6706

Année(s) : 02-07

Bolt on security for your engine compartment and under hood accessories with a Locking Hood Catch Kit from RT Off-Road. Included with each kit is a pair of black powder coated 304 stainless steel hood catches, a set of pre-installed lock cylinders with keys and all necessary hardware. Hood flutter, a very common problem with all Jeep JKs is eliminated by omitting rubber from the construction of the kit. This kit fits in place of the factory hood catches; a no-drill installation.

Référence : 51-JS-6828

RT Off-Road's Performance Axles are a direct replacement for the factory shaft but are upgraded to a 4340 alloy steel. This alloy is heat treated to improve both tensile and torsional strength by 30%. The shaft splines are rolled, not cut, into the shaft to further increase overall component strength. Sold in pairs and includes hardware.Chromoly Axle Shaft Set; Includes 2 Axles, Bearings, Seals, Wheel Studs, Tone Rings and Retainers; 27 Splines; Same as Factory Shafts.

Référence : 51-JS-6067

Black Anodized Throttle Body Spacer Kit; 1″ Thick to Provide a Smoother, Faster and More Dense Air Charge Resulting in HP, TQ and MPG Increases. Kit Includes: Aluminum Spacer, Gasket, Bolts and Washers.

Référence : 51-JS-6910

Black; Stick-On Type; No Drilling Required.

Référence : 51-JS-6720

High Performance Front Cross Drilled and Slotted Rotors; Includes Front Left and Right Rotors.

Référence : 51-JS-6930

Will not accept tire carrier mounts. Receiver designed for use with a D-Ring receiver. Other receivers (bike rack, tow hitch) require modifications to the receiver.RT Off-Road's heavy duty front and rear bumpers are a heavy duty plate steel constructed upgrade over factory bumpers. The 3/16″ thick plate steel construction is protected with a durable gloss black powder coat.Bumpers include D-Rings for recover use and mounting holes that are in the same location as the factory. Includes all hardware needed for installation and does not require any drilling or modification.Features Plate Steel Construction, Durable Gloss Black Powder Coat Finish and Integrated 2″ Receiver.

Référence : 51-JS-5960

1-3/4″ Lift; Includes Spacers and Bumpstop Extensions.Improve the look and off-road performance of your vehicle with RT Off-Road's Lift Kit. These kits lift the vehicle 1-3/4″ (2″ for the Liberty), improving ground clearance allowing the use of oversized tires. Black polyurethane construction. Shocks not included unless noted.

Référence : 51-JS-6701

Heavy Duty Zero-Lash Ball Joint Set; Includes 1 Upper and 1 Lower Ball Joint w/ Hardware.

Référence : 51-JS-6891

High Performance Rear Cross Drilled and Slotted Brake Rotors from RT Off-Road are designed for the most extreme abuse. These Brake Rotors were tested on: the steep descents in Moab, UT; stop and go traffic in Boston, MA; and the long range treks in-between. Each brake rotor is machine slotted and cross drilled to provide maximum cooling. This drastic cooling helps eliminate brake fade and potential warping. The design rapidly expels friction gases, debris, and water from the rotor and pad surface. You can expect greater braking response, increased performance, longer life, and a sporty new look.Includes Rear Left and Right Cross Drilled and Slotted Rotors.

Référence : 51-JS-6933