Marque Rough Trail

Improve the performance, durability and look of your suspension with RT Off-Road's Heavy Duty Shackle Kit. The shackle plates and reinforcement sleeves are finished in a rich black powder coat. Installation is as simple as removing the factory shackle assemblies and installing the supplied shackles. Effectively lifts vehicles 3/4"; Heavy duty plate steel construction; Includes installation instructions.

Référence : 51-JS-5984

RT Off-Road's Rear Bumper is a heavy duty full-width steel upgrade over the factory plastic bumper. The 3/16″ plate steel construction is protected with a durable textured black powder coat finish. This rear bumper includes mounting points for D-Rings and a large recess for an oversized spare tire. Installs into the factory bumper mounting location using the included hardware. Does not require any drilling or modification.

Référence : 51-JS-8135

Improve steering performance with RT Off-Road's Drop Pitman Arm. Lifting your Jeep without addressing the steering angles oftentimes results in bump steer and decreased turning radius. Installation of this drop pitman arm will reduce the operating angle of the drag link, resulting in improved steering feel and less wear on steering parts. Each arm is designed to bolt in place of the factory piece with no interference issues.

Référence : 51-JS-6967

Heavy Duty Fuel Tank Skid Plate; Made In USA.Constructed of 10-Gauge Steel; Black Powder Coat Finish; Includes Holes For Drainage; Bolts In Place of OE Skid Plate.

Référence : 51-JS-6796

Référence : 51-JS-6944

Année(s) : 96-06

N° vue éclatée : 0397

Includes Dual Piston Calipers w/ 54mm Pistons, Caliper Brackets, 13″ Diameter Drilled & Slotted Rotors, Pads and All Required Hardware For Installation.Rotors Are Drilled For a 5 On 5″ Bolt Pattern; 17-inch Wheels Are Required For Installation; 22% Shorter 60-0 Distance.22% Shorter 60-0 Distance; 42% Increase In Caliper Piston Area; 15% Increase In Brake Pad Contact Patch; 9% Larger Brake Rotor; 10% Larger Brake Pad Surface Area On Rotor; 9% Increase In Leverage.Larger Bore Master Cylinder (Replacement Part #: 68091278AB) Also Suggested For Better Brake Pedal Feel and Improved Braking Performance.Note: This Kit Will Not Work on JK's with "Moab" Wheels (Identified By 5 Large Spokes) Without Wheel Spacers.

Référence : 51-JS-6917

RT Off-Road's Heavy Duty Rear Bumper & Tire Carrier is a full-width tube steel upgrade over the factory plastic bumper. Durable tube construction is protected with a thick powder coat finish. These bumpers feature a receiver hitch designed for recovery. Carrier accepts 5 on 4.5″ bolt pattern wheels. Carrier will hold oversized tire and wheel combinations. Installs into the factory bumper mounting location using the included hardware. Does not require any drilling or modification.

Référence : 51-JS-8131

Heavy duty solid steel construction; No modifications needed to factory mounting components; Left hand drive models only; Includes all hardware needed for installation; Steering stabilizer not included.

Référence : 51-JS-6287

RT Off-Road's recovery accessories are a high quality, high value, collection of products. Designed and produced to ensure you have a strong, safe, and durable point to recover or couple. All metal recovery products are either powder coated black or zinc finished to protect the product for years of use.

Référence : 51-JS-6736

50″ LED Light Bar Windshield Mount Bracket; Fits RT28084 (50″ LED Light Bar); Mounts Using The Factory Windshield Hinge Bracket Holes; Includes Hardware and Rubber Isolators.

Référence : 51-JS-5918

Kit conversion "Performance" mastervac avec maitre cylindre de frein pour Jeep Wrangler YJ sans système d'ABS

Référence : 51-JS-6943

Année(s) : 87-90

N° vue éclatée : 0397

Black Shorty (13″) Antenna; Direct Replacement of the OE 31″ Long Steel Antenna.

Référence : 51-JS-6711

Référence : 51-JS-6990

Heavy Duty Fuel Tank Skid Plate; Made In The USA; Constructed of 10-Gauge Steel.Features Black Powder Coat Finish; Includes Holes For Drainage; Bolts In Place Of OE Skid Plate; Works With OE Fuel Tank Straps (Not Included).

Référence : 51-JS-6713

Référence : 51-JS-5950

Features 1 Cup Holder, 3 Rocker Switches, 1 12V Power Socket, 2 Round Switches, 3 Fuse Holders, a Locking Console Compartment With An Armrest Pad Covered In Marine-Grade Vinyl, Stainless Steel Hinges and Waterproof LED Lighting; Constructed of 16-Gauge Steel; Riveted Construction.

Référence : 51-JS-6364

Handles Feature Rubberized Plastic Grips; Mounts to the Top of the Windshield Frame; Includes 2 Handles; Mounts Using Factory Hardware.Note: Will Fit 2003-2006 Wrangler TJ If A-Pillar Trim Is Clearanced.

Référence : 51-JS-6590

Bump Stop Set; Includes two (2) 5″ Long Bump Stops.RT Off-Road's Extended Bump Stops prevent expensive body damage to lifted Jeep vehicles. They measure 5″ long and install in place of the factory foam bump stops. The polyurethane construction results in a longer product life and improved suspension control. They can be shortened to achieve the perfect amount of suspension articulation while still preventing the tires from contacting the body. Simple installation. Designed for vehicles with suspension lift.

Référence : 51-JS-6694

Polished Stainless Steel Body Side Lower Door Hinge Bracket Set; Includes 2 Brackets and Hardware.

Référence : 51-JS-6432

RT Off-Road's upgraded Sway Bar Links are an affordable upgrade that increases performance and handling. Not only will your vehicle perform better with our upgraded polyurethane bushing and boots, but the product will last longer than the factory rubber pieces it replaces. All sway bar links install in place of the factory link.Overall length is 8-1/4"; Black powder coated body with blue polyurethane boots and bushings; Polyurethane bushings provide long lasting performance and handling; Installs using factory hardware.

Référence : 51-JS-5974

RT Off-Road's OEM Style Replacement Soft Tops are a perfect way of replacing a worn and drafty top with foggy windows and broken zippers. Factory frames and hardware must be re-used.

Référence : 51-JS-7989

Référence : 51-JS-5957

Includes Rotors, Pads, Calipers, Backing Plates, Parking Brake Shoes, Brake Hoses, Parking Brake Cables, Axle Shaft Retainers, Axle Shaft Bearings, Axle Shaft Seals, Axle Shaft Retaining Rings and Hardware.Requires Replacement of Axle Shaft Bearings, SEals and Retainers (Included in Kit).

Référence : 51-JS-6914