Drive Train
-
Axle Shaft, Front, Outer; 08-18 Jeep Wrangler Rubicon JK, for Dana 44
This front outer stub axle shaft from Alloy USA fits Dana 44 axles found in 08-18 Jeep Wrangler Rubicon. 4340 chromoly alloy.
Référence : 52-JS-8433
263,39 € TVA : 20% 219,49 € HT -
Master Overhaul Kit; 92-14 Ford Truck/SUV, 8.8 Inch Axles
Master Overhaul Kit, Ford 8.8 by Alloy USA
Référence : 53-JS-0375
351,63 € TVA : 20% 293,02 € HT -
Master Overhaul Kit; 63-87 Toyota Land Cruiser, 9.5 Inch Axles
Master Overhaul Kit Straight by Alloy USA
Référence : 53-JS-0706
470,38 € TVA : 20% 391,98 € HT -
Axle Shaft, Front, Right, Inner; 74-79 Jeep Wagoneer SJ, for Dana 44
This 30 spline Dana 44 chromoly front right inner axle shaft from Alloy USA fits 74-79 Jeep SJ Wagoneer.
Référence : 52-JS-8421
301,03 € TVA : 20% 250,86 € HT -
Differential Yoke Conversion Kit; 84-02 Wrangler/Cherokee, for Dana 35
This yoke conversion kit from Alloy USA fits 84-95 Jeep XJ, 87-93 Wrangler YJ, and 97-02 TJ Wrangler with Dana 35 rear axle.
Référence : 53-JS-0076
188,03 € TVA : 20% 156,69 € HT -
Axle Shaft Kit, Rear, Right, 1 Piece, Wide-Track; 82-86 CJ5/CJ7, AMC 20
This one piece right axle shaft kit with Green Bearings from Alloy USA fits AMC 20 wide track found in 1982-1986 Jeep CJ7 and CJ8 Scrambler.
Référence : 52-JS-8290
301,03 € TVA : 20% 250,86 € HT -
Axle Shaft, Front, Right, Inner; 87-06 Jeep Wrangler YJ/TJ, for D30
This 27 spline Dana 30 chromoly front right inner axle shaft from Alloy USA fits 87-06 Jeep Wrangler.
Référence : 52-JS-8316
244,58 € TVA : 20% 203,82 € HT -
Axle Shaft Kit, Front; 77-87 GM 1/2 ton Pickup/SUV, 10 Bolt Axles
This 30 spline GM 10-bolt front axle shaft kit from Alloy USA fits 77-87 GM 1/2 ton Pickup and SUVs
Référence : 52-JS-8409
1 223,00 € TVA : 20% 1 019,17 € HT -
Ring and Pinion, 4.88 Ratio, Rear; 72-06 Jeep CJ/Wrangler, for Dana 44
This 4.88 ratio ring and pinion gear set fits 72-75 Jeep CJ5/6, 86 CJ7/8, and 97-06 Wrangler with a Dana 44 rear axle. Uses ten 3/8 inch ring bolts.
Référence : 52-JS-9847
432,72 € TVA : 20% 360,60 € HT -
Axle Locking Hub Kit, Manual; 90-94 Nissan Patrol
This pair of manual locking hubs from Rugged Ridge fits 90-94 Nissan Patrol, 31 spline axle, 6-bolt wheel pattern
Référence : 52-JS-9423
301,02 € TVA : 20% 250,85 € HT -
Axle Shaft, Rear; 91-96 Jeep Cherokee XJ, Chrysler 8.25 Inch Axles
This 27 spline left or right rear axle shaft from Alloy USA fits Chrysler 8.25" axles in 91-96 Jeep Cherokee. 29.75" Long.
Référence : 52-JS-8181
188,16 € TVA : 20% 156,80 € HT -
Ring and Pinion, 4.10 Ratio, Front; 72-86 CJ5/CJ7/CJ8, for Dana 30
This 4.10 ratio ring and pinion gear set from Alloy USA fits 72-75 Jeep CJ5, 86 CJ7/8 with a Dana 30 front axle. Uses ten 3/8 inch ring bolts.
Référence : 52-JS-9825
399,00 € TVA : 20% 332,50 € HT -
Axle Shaft, Rear, Right, ABS; 92-02 Wrangler/Cherokee, for Dana 35
This 27 spline rear right axle shaft from Alloy USA fits Dana 35 axles in 92-02 Jeep Cherokee and Wrangler with drum brakes and ABS. 29" Long.
Référence : 52-JS-8349
282,22 € TVA : 20% 235,18 € HT -
Axle Shaft, Rear, Right, C-Clip, ABS; 92-05 Wrangler, for Dana 35
This replacement rear axle shaft from Dana Spicer fits 92-05 Jeep Cherokee, Grand Cherokee, and Wrangler with Dana 35 C-clip rear axle and ABS.
Référence : 52-JS-8236
244,58 € TVA : 20% 203,82 € HT -
Brake Rotor Kit, Front, Hub Conversion; 87-06 Wrangler/Cherokee/TJ
Brake Rotor Front Hub Conversion YJ 1987-1995 Wrangler, 1997-2006 Wrangler, 1984-2001 Cherokee XJ by Alloy USA
Référence : 52-JS-9671
150,26 € TVA : 20% 125,22 € HT -
Axle Shaft, Rear, 5-Lug; 79-93 Ford Mustang/Ranger/Bronco, 8.8 Inch
This 28 spline 5-Lug rear axle shaft from Alloy USA fits Ford 8.8" axles found in 79-93 Ford Mustang, Ranger, and Bronco IIs 29.062" long.
Référence : 52-JS-8352
188,16 € TVA : 20% 156,80 € HT -
Axle shaft Kit, Front; 92-06 Jeep Wrangler/Cherokee, for Dana 30
This chromoly front axle shaft kit from Alloy USA fits 92-01 Jeep Cherokee XJ and 97-06 TJ Wrangler with Dana 30 front axle.
Référence : 52-JS-8495
1 505,10 € TVA : 20% 1 254,25 € HT -
Ring and Pinion, 4.88 Ratio, Front; 03-06 Wrangler TJ/LJ, for Dana 44
This 4.88 ratio ring and pinion gear set from Alloy USA fits 03-06 Jeep Wrangler Rubicon with Dana 44 front and rear axles.
Référence : 52-JS-9845
376,28 € TVA : 20% 313,57 € HT -
Ring and Pinion, 3.73 Ratio, Reverse; 48-91 Willys/Jeep, for Dana 44
This 3.73 ratio reverse ring and pinion from Alloy USA fits Dana 44.
Référence : 52-JS-9860
376,28 € TVA : 20% 313,57 € HT -
Axle Shaft Kit, Rear; 97-06 Jeep Wrangler TJ, for Dana Mas Grande 44
This 35 spline Dana 44 Mas Grande rear axle shaft kit from Alloy USA fits 97-06 Jeep Wrangler.
Référence : 52-JS-8292
564,45 € TVA : 20% 470,37 € HT -
Ring and Pinion Kit, 4.10 Ratio; 97-06 Wrangler, for Dana 30/44
This 4.10 ratio ring and pinion with master install kit from Omix services Dana 30 front and Dana 44 rear axles found in 97-06 Wrangler TJ
Référence : 52-JS-9667
1 223,00 € TVA : 20% 1 019,17 € HT -
Axle Shaft, Rear; 75-88 GM G-series Vans, GM-T 10 Bolt 8.5 Inch
This 28 spline left or right rear axle shaft from Alloy USA fits GM-T 8.5" 10-bolt axles in 75-88 GM G-series vans. 33.312" Long.
Référence : 52-JS-8199
244,58 € TVA : 20% 203,82 € HT -
Diff Overhaul Kit, Front, D30; 18-20 JL
This Master Overhaul Kit fits 18-20 Jeep Wrangler JL Dana 30 Front.
Référence : 53-JS-0620
376,28 € TVA : 20% 313,57 € HT -
Axle Shaft Kit, Front; 92-06 Wrangler/Cherokee, for Dana Grande 30
This 30 spline Dana 30 Grande front axle shaft conversion kit from Alloy USA fits 92-01 Jeep Cherokee, 97-06 Wrangler, and 04-06 Wrangler LJ. Must use 00-06 Wrangler front brake rotors.
Référence : 52-JS-8304
1 223,00 € TVA : 20% 1 019,17 € HT
