Drive Train
-
Differential Cover, Cast Steel; 71-18 CJ/Wrangler, for Dana 30
This 3/8 inch thick cast steel heavy duty differential cover from Alloy USA fits 71-18 Jeep with Dana 30 front axle.Référence : 53-JS-0686
HT : 155,52 € TTC : 186,62 € -
Axle Shaft, Rear, Right; 07-18 Wrangler JK Rubicon, for Dana Grande 44
This 32 spline rear left axle shaft from Alloy USA fits Dana 4 Grande axles in 07-18 Jeep Wrangler Rubicon. 32.175" Long.Référence : 52-JS-8371
HT : 199,99 € TTC : 239,99 € -
Axle Shaft Kit, Rear; 07-18 Jeep Wrangler JK/JKU, for Dana 44
This chromoly, 30 spline rear axle shaft kit from Alloy USA fits 07-18 Jeep Wrangler with Dana 44 rear axle.Référence : 52-JS-8502
HT : 588,80 € TTC : 706,56 € -
Ring and Pinion, 5.29 Ratio, 10 Bolt; 03-18 Toyota Truck/SUV, 8 Inch
Toyota 8 (200Mm) 5.29 Ring/Pinion by Alloy USARéférence : 52-JS-9729
HT : 436,76 € TTC : 524,11 € -
Ring and Pinion, 4.56 Ratio, Rear; 72-06 Jeep CJ/Wrangler, for Dana 44
This 4.56 ratio ring and pinion gear set fits 72-75 Jeep CJ5/6, 86 CJ7/8, and 97-06 Wrangler with a Dana 44 rear axle. Uses ten 3/8 inch ring bolts.Référence : 52-JS-9851
HT : 255,52 € TTC : 306,62 € -
Axle Shaft, Rear, Right, Non ABS; 97-06 Jeep Wrangler TJ, for Dana 44
This 30 spline rear right axle shaft from Alloy USA fits Dana 44 axles in 97-06 Jeep Wrangler without ABS. 29.75" long.Référence : 52-JS-8225
HT : 166,66 € TTC : 199,99 € -
Ring and Pinion Kit, 4.10 Ratio; 07-18 Jeep Wrangler, for Dana 44/44
This 4.10 ratio ring and pinion kit from Alloy USA fits 07-18 Jeep Wrangler Rubicon models with a Dana 44 front and rear axle.Référence : 52-JS-9926
HT : 888,88 € TTC : 1 066,66 € -
Axle Shaft, Rear, Left, C-Clip; 90-06 Jeep YJ/XJ, for Dana Grande 35
This 30 spline rear left axle shaft fits C-Clip Dana 35 Grande axles in 90-01 Jeep Cherokee and 90-06 Wrangler without ABS. 30.562" Long.Référence : 52-JS-8313
HT : 144,43 € TTC : 173,32 € -
Master Overhaul Kit, Front; 07-18 Jeep Wrangler JK/JKU, for Dana 30
This differential master Overhaul kit from Alloy USA fits 07-18 Jeep Wrangler with Dana 30 front axle.Référence : 53-JS-0733
HT : 222,08 € TTC : 266,50 € -
Hub, Locking, Manual, Pair; 99-04 Super Duty Ford, Excursion
This manual locking hub kit from Omix fits 1999-2004 Super Duty Fords and Excursions with factory manual locking hubs.Référence : 52-JS-8456
HT : 144,43 € TTC : 173,32 € -
Axle Locking Hub Kit, Manual; 90-04 Frontier/Pathfinder/Xterra
This pair of manual locking hubs from Rugged Ridge fit 90-01 Nissan Frontier/Pathfinder and 00-04 Nissan Xterra.Référence : 52-JS-9595
HT : 222,08 € TTC : 266,50 € -
Ring and Pinion, 4.56 Ratio, Reverse; 55-12 Chry/GM/Ford, for Dana 60
This 4.46 ratio reverse ring and pinion from Alloy USA fits Dana 60.Référence : 52-JS-9763
HT : 277,77 € TTC : 333,32 € -
Axle Shaft, Rear, Right, Narrow Track; 76-83 Jeep CJ5/CJ7/CJ8, AMC 20
This 29 spline 2-piece rear right axle shaft from Alloy USA fits Narrow-Trac AM20 axles in 76-83 Jeep CJ5, CJ7, and CJ8. 29" Long.Référence : 52-JS-8179
HT : 77,77 € TTC : 93,32 € -
Ring and Pinion, 3.90 Ratio, 10 Bolt; 71-97 GM Car/Truck/SUV, 8.5 Inch
Alloy USA -- GM 8 1/2 - 3.90 Ring and PinionRéférence : 52-JS-9885
HT : 222,21 € TTC : 266,65 € -
Axle Shaft, Rear, Right, Disc Brakes; 03-06 Wrangler, for Dana 44
This 30 spline rear right axle shaft from Alloy USA fits Dana 44 axles in 03-06 Jeep Wrangler with disc brakes with or without ABS. 29.75" Long.Référence : 52-JS-8274
HT : 166,66 € TTC : 199,99 € -
Axle Shaft Kit, 1 Piece, Narrow Track; 76-83 Jeep CJ5/CJ7/CJ8, AMC 20
This one piece axle conversion kit from Alloy USA fits AMC20 narrow track axles in 76-83 Jeep CJ5, 76-81 CJ7, and 1981 CJ8. Includes: Axles, Bearings, Retainers, Spacers, Inner/Outer Seals, and Studs.Référence : 52-JS-8282
HT : 388,80 € TTC : 466,56 € -
Master Overhaul Kit; 64-72 Chevrolet/Pontiac, 8.2 Inch Axles
Master Overhaul Kit GM 8.2 by Alloy USARéférence : 53-JS-0699
HT : 199,99 € TTC : 239,99 € -
Axle Shaft, Front, Left, Inner; 97-06 Jeep Wrangler TJ/LJ, for Dana 60
This 35 spline chromoly inner front axle shaft from Alloy USA fits 97-06 Jeep Wrangler with aftermarket Dana 60 axles. Fits the left side.Référence : 52-JS-8384
HT : 277,77 € TTC : 333,32 € -
Axle Tube Seal Kit, Front, Black; 84-06 Jeep Cherokee/Wrangler XJ/TJ
This pair of black front axle tube seals fits 84-06 Cherokee, Grand Cherokee, and Wrangler w/o vacuum disconnect axles or CV axle shafts.Référence : 52-JS-8589
HT : 77,76 € TTC : 93,31 € -
Ring and Pinion, 4.56 Ratio; 48-91 Willys/Jeep, for Dana 44
This 4.56 ratio ring and pinion from Alloy USA fits Dana 44.Référence : 52-JS-9736
HT : 227,77 € TTC : 273,32 € -
U-Joint Snap Ring, 1.188 Inch Cap, 1/16 ring width
This full circle snap ring from Alloy USA fits U-Joints with a 1.188 inch size cap and a 1/16 inch snap ring width.Référence : 52-JS-4684
HT : 4,32 € TTC : 5,18 € -
Ring and Pinion, 3.73 Ratio, Front; 72-86 CJ5/CJ7/CJ8, for Dana 30
This 3.73 ratio ring and pinion gear set from Alloy USA fits 72-86 Jeep CJ5, CJ7 and CJ8 with Dana 30 front axle. Uses eight 3/8 inch ring gear bolts.Référence : 52-JS-9858
HT : 222,21 € TTC : 266,65 € -
Axle Shaft, Rear, Right, C-Clip; 90-98 GM Mini-vans, 7.5 Inch Axles
This 28 spline rear right axle shaft from Alloy USA fits GM 7.5" C-Clip axles in 90-98 GM mini-vans. 30.062" Long.Référence : 52-JS-8239
HT : 111,10 € TTC : 133,32 € -
Ring and Pinion, 5.13 Ratio; 48-91 Willys/Jeep, for Dana 44
This 5.13 ratio ring and pinion from Alloy USA fits Dana 44.Référence : 52-JS-9933
HT : 227,77 € TTC : 273,32 € -
Axle Shaft Kit, Front, 30 Spline; 68-79 Ford F-150/Bronco, for Dana 44
This 30 spline Dana 44 chromoly front axle shaft kit from Alloy USA fits 68-79 Ford F-150s/BroncoRéférence : 52-JS-8320
HT : 666,66 € TTC : 799,99 € -
Axle Shaft, Rear; 95-00 Toyota Tacoma
This chromoly rear axle shaft from Alloy USA fits 95.5-00 Toyota Tacoma.Référence : 52-JS-8471
HT : 159,99 € TTC : 191,99 € -
Brake Rotor Kit, Rear, 12 inch, Drilled/Slotted; 07-18 Wrangler JK
This pair of 12 inch slotted and cross-drilled rear brake rotors from Alloy USA fit 07-18 Jeep Wrangler.Référence : 52-JS-9623
HT : 188,80 € TTC : 226,56 € -
Ring and Pinion, 4.56 Ratio; 82-11 Ford Mustang/Truck/SUV, 8.8 Inch
Ford 8.8-4.56 Ring/Pinion by Alloy USARéférence : 52-JS-9769
HT : 222,21 € TTC : 266,65 € -
Axle Shaft, Rear, 28 Spline; 98-02 Chevrolet Camaro, GM 7.625 Inch
This 28 spline left or right rear axle shaft from Alloy USA fits GM 7.625 axles in 98-02 Chevrolet Camaro with traction control. 32" Long.Référence : 52-JS-8186
HT : 144,32 € TTC : 173,18 € -
Ring and Pinion, 3.08 Ratio, 10 Bolt; 71-97 GM Car/Truck/SUV, 8.5 Inch
GM 8 1/2-3.08 Ring/Pinion by Alloy USARéférence : 52-JS-9890
HT : 249,99 € TTC : 299,99 € -
Axle Shaft, Rear, 31 Spline; 79-93 Ford Mustang, 8.8 Inch Axles
This 31 spline rear axle shaft from Alloy USA fits 8.8" axles found in 79-93 Ford Mustang. 29.062" Long. Requires 31 spline carrier upgrade.Référence : 52-JS-8195
HT : 111,10 € TTC : 133,32 € -
Ring and Pinion, 4.56 Ratio, Front; 07-18 Wrangler JK/JKU, for Dana 30
This 4.56 ratio ring and pinion gear set from Alloy USA fits 07-18 Jeep Wrangler with Dana 30 front axle. Uses eight 3/8 inch ring gear bolts.Référence : 52-JS-9895
HT : 255,52 € TTC : 306,62 € -
Axle Shaft Kit, 1 Piece, Right, Narrow Trac; 76-83 CJ5/CJ7/CJ8, AMC 20
This one piece right axle kit from Alloy USA fits AMC 20 narrow track axles found in 76-83 CJ5, 76-81 CJ7, and 81 CJ8. Includes Right axle shaft, bearings, retainers, spacers, inner and outer seals, and studs.Référence : 52-JS-8288
HT : 177,77 € TTC : 213,32 € -
Master Overhaul Kit; 63-87 Toyota Land Cruiser, 9.5 Inch Axles
Master Overhaul Kit Straight by Alloy USARéférence : 53-JS-0706
HT : 277,77 € TTC : 333,32 € -
Axle Shaft, Front, Outer; 99-10 Ford F-Series Trucks, for Dana 60
This 35 spline Dana 60 outer axle shaft from Alloy USA fits 99-10 Ford F-250/F-350/F-450/F-550. Requires unit bearing style 35 spline carrier upgrade.Référence : 52-JS-8394
HT : 138,88 € TTC : 166,66 € -
Differential Bearing Kit; 76-86 CJ5/CJ7/CJ8/Wagoneer/Cherokee, AMC 20
This bearing, seal, and spacer kit from Alloy USA fits 76-83 Jeep CJ and SJ models with AMC 20 rear axle.Référence : 52-JS-8604
HT : 133,28 € TTC : 159,94 € -
Ring and Pinion, 4.88 Ratio, 14 Bolt; 72-18 Chevrolet/GMC, 10.5 Inch
GM 10.5 4.88 R/P by Alloy USARéférence : 52-JS-9741
HT : 277,77 € TTC : 333,32 € -
Axle Shaft Kit, Rear, C-Clip, ARB; 90-02 XJ/YJ/TJ, for Dana Grande 35
This rear axle shaft and ARB air locker kit from Alloy USA fits C-Clip Dana 35 Grande axles in 90-02 Jeep Cherokee and Wrangler without ABS.Référence : 52-JS-7786
HT : 2 111,04 € TTC : 2 533,25 € -
Ring and Pinion, 5.13 Ratio, Reverse; 48-91 Willys/Jeep, for Dana 44
This 5.13 ratio reverse ring and pinion from Alloy USA fits Dana 44.Référence : 52-JS-9863
HT : 222,21 € TTC : 266,65 € -
Axle Shaft, Rear, Left; 99-04 Jeep Grand Cherokee WJ, for Dana 35
This 27 spline rear left axle shaft from Alloy USA fits Dana 35 axles in 99-04 Jeep Grand Cherokee with Hydra-Loc. 31.875" Long.Référence : 52-JS-8245
HT : 188,80 € TTC : 226,56 € -
Differential Yoke Conversion Kit; 84-02 Wrangler/Cherokee, for Dana 35
This yoke conversion kit from Alloy USA fits 84-95 Jeep XJ, 87-93 Wrangler YJ, and 97-02 TJ Wrangler with Dana 35 rear axle.Référence : 53-JS-0076
HT : 111,04 € TTC : 133,25 € -
Axle Shaft Conversion Kit, Rear, Wide Track; 82-86 CJ7/CJ8, AMC 20
This 29 spline AMC20 1-piece rear axle shaft conversion kit from Alloy USA fits "Wide Track" 82-86 Jeep CJ7 and CJ8Référence : 52-JS-8338
HT : 388,80 € TTC : 466,56 € -
Axle Shaft Conversion Kit, Rear, Quadra Trac; 76-79 CJ7, AMC 20
This 29 spline AMC20 1-piece rear axle shaft conversion kit from Alloy USA fits 76-79 Jeep CJ7 with Quadra-Trac 4WD system.Référence : 52-JS-8477
HT : 388,80 € TTC : 466,56 € -
Ring and Pinion Kit, 3.73 Ratio; 97-06 Wrangler, for Dana 30/44
This 3.73 ratio ring and pinion with master install kit from Omix services Dana 30 front and Dana 44 rear axles found in 97-06 Wrangler TJRéférence : 52-JS-9665
HT : 722,21 € TTC : 866,65 € -
Ring and Pinion, 5.38 Ratio, for Dana 44
This 5.38 ratio ring and pinion from Alloy USA fits Dana 44.Référence : 52-JS-9774
HT : 227,77 € TTC : 273,32 € -
Ring and Pinion, 4.56 Ratio, 12 Bolt; 63-87 Chevrolet/GMC, 8.875 Inch
GM 8 7/8-4.56 Truck Ring/by Alloy USARéférence : 52-JS-9789
HT : 222,21 € TTC : 266,65 € -
Axle Shaft, Rear, Right, Quadra Trac; 76-79 Jeep CJ7, AMC 20
This 29 spline rear right axle shaft from Alloy USA fits AMC 20 QuadraTrac axles in 76-79 Jeep CJ7. 19" Long.Référence : 52-JS-8200
HT : 166,66 € TTC : 199,99 € -
Ring and Pinion, 3.73 Ratio; 72-86 Jeep CJ5/CJ7/CJ8 Scrambler, AMC 20
This 3.73 ratio ring and pinion gear set from Alloy USA fits 72-86 Jeep CJ5, CJ7, and CJ8 with an AMC20 rear axle.Référence : 52-JS-9907
HT : 261,10 € TTC : 313,32 €