Drive Train
-
Axle Shaft, Rear, Left, Large Bearing; 97-02 Ford Exped/Nav, 33.5 Inch
Left Rear axle fits 97-02 Ford Expeditions/Lincoln Navigators with a 34 Spine, 9.75 inch, 1.705 Bearing, 15.5mm Studs. 33.5 inch. by Alloy USA
Référence : 52-JS-7805
188,16 € TVA : 20% 156,80 € HT -
Master Overhaul Kit, Front; 72-86 CJ5/CJ7/CJ8 Scrambler, for Dana 30
This differential master Overhaul kit from Alloy USA fits 72-83 Jeep CJ5, CJ7, and CJ8 with Dana 30 front axle.
Référence : 53-JS-0719
376,28 € TVA : 20% 313,57 € HT -
Ring and Pinion, 4.10 Ratio, 84-06 Jeep YJ/TJ/XJ/ZJ/MJ, for Dana 35
This 4.10 ratio ring and pinion for Dana 35 by Alloy USA
Référence : 52-JS-9761
849,14 € TVA : 20% 707,62 € HT -
Axle Shaft, Rear, Right; 83-92 Ford Ranger, 7.5 Inch Axles
This 28 spline chromoly rear right axle shaft from Alloy USA fits Ford 7.5" axles found in 83-92 Ford Ranger. 26.25" long.
Référence : 52-JS-8252
188,16 € TVA : 20% 156,80 € HT -
Axle Shaft Kit, 1 Piece, Wide Track; 82-86 CJ7/CJ8 Scrambler, AMC 20
This one piece axle conversion kit from Alloy USA fits AMC20 wide track axles found in 82-86 CJ7 and 82-86 CJ8. Includes: Axles, Bearings, Retainers, Spacers, Inner/Outer Seals, and Studs.
Référence : 52-JS-8285
658,41 € TVA : 20% 548,67 € HT -
Mini Install Kit, Front; 07-18 Jeep Wrangler JK Rubicon, for Dana 44
Mini Install Kit for Dana 44 JK R by Alloy USA
Référence : 53-JS-0730
150,51 € TVA : 20% 125,42 € HT -
Differential Cover, Heavy Duty, 5/16 inch Steel, for Dana 60
This 5/16 inch-thick stamped steel heavy duty differential cover from Alloy USA fits 74-88 Jeep J20 pickups with Dana 60 rear axle.
Référence : 53-JS-0376
169,33 € TVA : 20% 141,11 € HT -
Ring and Pinion, 4.10 Ratio, Rear; 84-06 Jeep YJ/TJ/XJ, for Dana 35
This 4.10 ratio ring and pinion from Alloy USA fits Dana 35.
Référence : 52-JS-9720
376,28 € TVA : 20% 313,57 € HT -
Ring and Pinion, 5.13 Ratio, Rear; 97-06 Wrangler TJ/LJ, for Dana 44
This 5.13 ratio ring and pinion gear set from Alloy USA fits 97-06 Jeep Wrangler with Dana 44 rear axle. Uses ten 3/8 inch ring gear bolts.
Référence : 52-JS-9870
376,28 € TVA : 20% 313,57 € HT -
Axle Shaft, Rear, Left, Disc Brakes, ABS; 03-06 Wrangler, for Dana 35
This 27 spline rear left axle shaft from Alloy USA fits Dana 35 axles in 03-06 Jeep Wrangler with disc brakes and ABS. 29.75" long.
Référence : 52-JS-8341
282,22 € TVA : 20% 235,18 € HT -
Axle Shaft, Rear, Right, Wide-Track; 82-86 CJ7/CJ8 Scrambler, AMC 20
This 29 spline 1-piece rear right axle shaft from Alloy USA fits Wide-Trac AMC20 axles in 82-86 Jeep CJ7 and 81-86 CJ8. 27.437" Long.
Référence : 52-JS-8281
301,03 € TVA : 20% 250,86 € HT -
Ring and Pinion, 4.88 Ratio, 10 Bolt; 71-97 GM Car/Truck/SUV, 8.5 Inch
This 4.88 ratio ring and pinion gear set from Alloy USA fits GM 10-bolt axles.
Référence : 52-JS-9772
423,34 € TVA : 20% 352,78 € HT -
Master Overhaul Kit; 76-95 Chrysler Truck, 8.375 Inch Axles
Master Overhaul Kit 1976+ Chrysler 8.375 by Alloy USA
Référence : 53-JS-0712
282,22 € TVA : 20% 235,18 € HT -
Ring and Pinion Kit, 5.13 Ratio; 07-18 Jeep Wrangler, for Dana 44/44
This 5.13 ratio ring and pinion kit from Alloy USA fits 07-18 Jeep Wrangler Rubicon models with a Dana 44 front and rear axle.
Référence : 52-JS-9924
1 599,30 € TVA : 20% 1 332,75 € HT -
Axle Shaft, Rear, Right; 97-04 Ford F-150/Expedition, 838 Inch Axles
This 31 spline chromoly rear right axle shaft from Alloy USA fits Ford 8.8" axles found in 97-04 F-150s/Expedition. 31.75" long.
Référence : 52-JS-8485
188,16 € TVA : 20% 156,80 € HT -
Ring and Pinion, 5.13 Ratio; 93-97 Ford F-150/F-250, 10.25 Inch Axles
Ford 10 1/4-5.13 Ring/Pinion by Alloy USA
Référence : 52-JS-9751
538,53 € TVA : 20% 448,77 € HT -
Axle Shaft, Rear; 88-94 Chevrolet S-10 Pickup, GM 7.5 Inch Axles
This 28 spline left or right rear axle shaft from Alloy USA fits GM 7.5" axles in 88-94 S-10 Pickup. 26.625" Long.
Référence : 52-JS-8354
234,41 € TVA : 20% 195,34 € HT -
Axle Shaft, Rear, Left, 31 Spline; 99-04 Ford Mustang, 8.8 Inch Axles
This 31 spline rear left axle shaft fits Ford 8.8" axles found in 99-04 Mustang. 30.625" long. Requires 31 spline carrier upgrade.
Référence : 52-JS-8259
188,16 € TVA : 20% 156,80 € HT -
Axle Shaft, Front, Outer; 87-06 Wrangler YJ/TJ/LJ, for Dana Grande 30
This 27 spline Dana 30 Grande front chromoly outer axle shaft from Alloy USA fits 87-06 Jeep Wrangler.
Référence : 52-JS-8396
188,16 € TVA : 20% 156,80 € HT -
Diff Overhaul Kit, Front, D44; 18-20 JL
This Master Overhaul Kit fits 18-20 Jeep Wrangler JL Dana 44 Front.
Référence : 53-JS-0625
564,45 € TVA : 20% 470,37 € HT -
Axle Shaft, Rear; 81-88 GM 1/2 ton Pickup/SUV, GM-T 10 Bolt Axles
This 28 spline left or right rear axle shaft from Alloy USA fits GM-T 10-bolt 8.5" C-Clip axles in 81-88 GM 1/2 ton Pickup and SUVs. 31.312" Long.
Référence : 52-JS-8248
246,12 € TVA : 20% 205,10 € HT -
Axle Shaft Kit, Front, 30 Spline; 68-79 Ford F-150/Bronco, for Dana 44
This 30 spline Dana 44 chromoly front axle shaft kit from Alloy USA fits 68-79 Ford F-150s/Bronco
Référence : 52-JS-8320
1 128,93 € TVA : 20% 940,77 € HT -
Ring and Pinion, 4.10 Ratio, 14 Bolt; 72-18 Chevrolet/GMC, 10.5 Inch
GM10 1/2-4.10 Ring/Pinion by Alloy USA
Référence : 52-JS-9799
376,28 € TVA : 20% 313,57 € HT -
Axle Shaft, Rear, Left; 07-18 Wrangler JK Rubicon, for Dana Grande 44
This 32 spline rear left axle shaft from Alloy USA fits Dana 4 Grande axles in 07-18 Jeep Wrangler Rubicon. 30.79" long.
Référence : 52-JS-8370
357,55 € TVA : 20% 297,96 € HT

























