Catalogue de Pièces et Accessoires RT Off-Road pour Jeep

High Performance Front Cross Drilled and Slotted Brake Rotors from RT Off-Road are designed for the most extreme abuse. These Brake Rotors were tested on: the steep descents in Moab, UT; stop and go traffic in Boston, MA; and the long range treks in-between. Each brake rotor is machine slotted and cross drilled to provide maximum cooling. This drastic cooling helps eliminate brake fade and potential warping. The design rapidly expels friction gases, debris, and water from the rotor and pad surface. You can expect greater braking response, increased performance, longer life, and a sporty new look.

Référence : 51-JS-6936

Black; Stick-On Type; No Drilling Required.

Référence : 51-JS-6720

RT Off-Road's Front Bumper is a heavy duty full-width plate steel upgrade over the factory plastic bumper. The 3/16″ plate steel and tubular steel construction is protected with a durable textured black powder coat. Bumper includes holes for a winch mount, winch fairlead mounting holes, and additional holes for mounting lights. Installs into the factory bumper mounting location using the included hardware. Does not require any drilling or modification.

Référence : 51-JS-8136

Heavy Duty Dana 30 Differential Cover; 3/8″ Thick Forged Steel w/ Ribs to Increase Strength; Semi-Gloss Black Powder Coat.Fill Plug Located Higher Than Stock for a Higher Fluid Capacity; Mounting Surfaces Machined Flat to Prevent Leaks; Includes Flanged Hex Bolts, Recessed Fill Plug and RTV.

Référence : 51-JS-7004

Référence : 51-JS-7001

Equip your vehicle with low-profile LED Block Lamps by RT Off-Road. Each lamp is constructed of an aluminum body. The 6 Nichia LEDs in each lamp produce 2400 lumens at only 18 watts, resulting in an impressive amount of light without the need to upgrade the charging system of the vehicle. Matte black anodization, an IP86 rating, and a 50,000 hour LED bulb life means that these lamps are designed to last, even in the harshest conditions. Every aspect of product design, manufacturing, and assembling takes place in the USA. Included is a pair of block lamps measuring 3.5″ x 4.5″ x .75″, a pair of mounting brackets with hardware, windshield light mount brackets with hardware, a wiring harness for a pair of lamps, and a switch.

Référence : 51-JS-6989

LED Block Lamp and Harness Kit; Equip your vehicle with low-profile LED Block Lamps by RT Off-Road. Each lamp is constructed of an aluminum body. The 6 Nichia LEDs in each lamp produce 2400 lumens at only 18 watts, resulting in an impressive amount of light without the need to upgrade the charging system of the vehicle. Matte black anodization, an IP86 rating, and a 50,000 hour LED bulb life means that these lamps are designed to last, even in the harshest conditions. Every aspect of product design, manufacturing, and assembling takes place in the USA. Included is a pair of block lamps measuring 3.5″ x 4.5″ x .75″, a pair of mounting brackets with hardware, windshield light mount brackets with hardware, a wiring harness for a pair of lamps, and a switch.

Référence : 51-JS-6987

Equip your vehicle with low-profile LED Block Lamps by RT Off-Road. Each lamp is constructed of an aluminum body. The 6 Nichia LEDs in each lamp produce 2400 lumens at only 18 watts, resulting in an impressive amount of light without the need to upgrade the charging system of the vehicle. Matte black anodization, an IP86 rating, and a 50,000 hour LED bulb life means that these lamps are designed to last, even in the harshest conditions. Every aspect of product design, manufacturing, and assembling takes place in the USA. Included is a pair of block lamps measuring 3.5″ x 4.5″ x .75″, a pair of mounting brackets with hardware, windshield light mount brackets with hardware, a wiring harness for a pair of lamps, and a switch.

Référence : 51-JS-6986

Equip your vehicle with an LED Miniature Bulb Kit by RT Off-Road. Each bulb features 6 Cree LEDs that produce 1200 lumens at only 7.2 watts, resulting in a 360 degree light pattern. Included are 2 direct-fit LED Miniature Bulbs. No cutting or splicing is necessary.

Référence : 51-JS-6978

Equip any vehicle with an LED Miniature Bulb Kit by RT Off-Road. Each bulb features 6 Cree LEDs that produce 1200 lumens at only 7.2 watts, resulting in a 360 degree light pattern. Included are 2 direct-fit LED Miniature Bulbs. No cutting or splicing is necessary.

Référence : 51-JS-6976

Equip your vehicle with an LED Miniature Bulb Kit by RT Off-Road. Each bulb features 5 Cree LEDs that produce 1000 lumens at only 2.4 watts, resulting in a 360 degree light pattern. Included are 2 direct-fit LED Miniature Bulbs. No cutting or splicing is necessary.

Référence : 51-JS-6973

Equip any vehicle with an LED Headlight Bulb Kit by RT Off-Road. Each bulb features 4 Cree LEDs that produce 1500 lumens at only 16.8 watts, resulting in an impressive amount of light without the need to upgrade the charging system of the vehicle. A copper weave cloth is used as a heat sink in place of a noisy and failure prone fan. The color output from these bulbs is 6500k. Included are 2 direct-fit LED Headlamp Bulbs. No cutting or splicing is necessary.

Référence : 51-JS-6972

9005 LED Headlamp Bulb Kit.Equip your vehicle with an LED Headlight Bulb Kit by RT Off-Road. Each bulb features 2 Cree LEDs that produce 1250 lumens at only 11.52 watts, resulting in an impressive amount of light without the need to upgrade the charging system of the vehicle. A copper weave cloth is used as a heat sink in place of a noisy and failure prone fan. The color output from these bulbs is 6500k. Included are 2 direct-fit LED Headlamp Bulbs. No cutting or splicing is necessary.

Référence : 51-JS-6971

9007 LED Headlamp Bulb Kit; Equip your vehicle with an LED Headlight Bulb Kit by RT Off-Road. Each bulb features 4 Cree LEDs that produce 1500 lumens at only 16.8 watts, resulting in an impressive amount of light without the need to upgrade the charging system of the vehicle. A copper weave cloth is used as a heat sink in place of a noisy and failure prone fan. The color output from these bulbs is 6500k. Included are 2 direct-fit LED Headlamp Bulbs. No cutting or splicing is necessary.

Référence : 51-JS-6970

Equip your vehicle with an LED Headlight Bulb Kit by RT Off-Road. Each bulb features 2 Cree LEDs that produce 1250 lumens at only 11.52 watts, resulting in an impressive amount of light without the need to upgrade the charging system of the vehicle. A copper weave cloth is used as a heat sink in place of a noisy and failure prone fan. The color output from these bulbs is 6500k. Included are 2 direct-fit LED Headlamp Bulbs. No cutting or splicing is necessary.

Référence : 51-JS-6966

Equip any vehicle with an LED Headlight Bulb Kit by RT Off-Road. Each bulb features 2 Cree LEDs that produce 1250 lumens at only 11.52 watts, resulting in an impressive amount of light without the need to upgrade the charging system of the vehicle. A copper weave cloth is used as a heat sink in place of a noisy and failure prone fan. The color output from these bulbs is 6500k. Included are 2 direct-fit LED Headlamp Bulbs. No cutting or splicing is necessary.

Référence : 51-JS-6962

Equip your vehicle with a LED Fog Lamp Kit by RT Off-Road. Each lamp is constructed of an aluminum body. The 3 Nichia LEDs in each lamp produce 1200 lumens at only 9 watts, resulting in an impressive amount of light without the need to upgrade the charging system of the vehicle. Matte black anodization, an IP86 rating, and a 50,000 hour LED bulb life means that these lamps are designed to last, even in the harshest conditions. Every aspect of product design, manufacturing, and assembling takes place in the USA. Included is a pair of LED Fog Lamps designed to replace OEM fog lamps and a pair of mounting brackets. No cutting or splicing is necessary.

Référence : 51-JS-6961

Equip your vehicle with a LED Fog Lamp Kit by RT Off-Road. Each lamp is constructed of an aluminum body. The 3 Nichia LEDs in each lamp produce 1200 lumens at only 9 watts, resulting in an impressive amount of light without the need to upgrade the charging system of the vehicle. Matte black anodization, an IP86 rating, and a 50,000 hour LED bulb life means that these lamps are designed to last, even in the harshest conditions. Every aspect of product design, manufacturing, and assembling takes place in the USA. Included is a pair of LED Fog Lamps designed to replace OEM fog lamps and a pair of mounting brackets. No cutting or splicing is necessary.

Référence : 51-JS-6959

Replace those old, rusty Tailgate Hinges with a set from RT Off-Road. Each set is manufactured out of stainless steel and then polished to a brilliant finish. Stainless steel hardware is included.

Référence : 51-JS-6509

Protect your soft top with RT Off-Road's Soft Top Storage Sleeve. Installs quickly and easily on top with no special tools. Available in multiple colors for a direct match to soft top material.

Référence : 51-JS-6402