Produits Performances Jeep

RT Off-Road's upgraded Sway Bar Links are an affordable upgrade that increases performance and handling. Not only will your vehicle perform better with our upgraded polyurethane bushing and boots, but the product will last longer than the factory rubber pieces it replaces. All sway bar links install in place of the factory link.Overall length is 8-1/4"; Black powder coated body with blue polyurethane boots and bushings; Polyurethane bushings provide long lasting performance and handling; Installs using factory hardware.

Référence : 51-JS-5974

Includes Rotors, Pads, Calipers, Backing Plates, Parking Brake Shoes, Brake Hoses, Parking Brake Cables, Axle Shaft Retainers, Axle Shaft Bearings, Axle Shaft Seals, Axle Shaft Retaining Rings and Hardware.Requires Replacement of Axle Shaft Bearings, SEals and Retainers (Included in Kit).

Référence : 51-JS-6914

RT Off-Road's Clear Light Kits are a DOT-legal way to give the vehicle an all new look. These crystal clear lenses come complete with amber bulbs. The bulbs and lenses included in our kit will install directly into the factory wiring harnesse and body. Installation requires no modifications to the body and can be completed with basic hand tools.Includes 2 clear parking lamps, 2 clear side marker lamps and four (4) amber bulbs. Modifications to parking lamp wiring required for 94/95 YJ models. 8128931 Connector is required to use on 94/95 models.

Référence : 51-JS-6887

Référence : 51-JS-6951

Année(s) : 82-86

N° vue éclatée : 0359

Référence : 51-JS-5841

Année(s) : 07-11

Référence : 51-JS-6938

Année(s) : 05-10

N° vue éclatée : 0322

Heavy Duty Front Axle Shift Fork Kit; Includes HD Fork, Gasket, Clips, Snap Rings and Hardware.

Référence : 51-JS-6999

Front Left Park & Turn Signal Lamp; Clear.

Référence : 51-JS-6884

Référence : 51-JS-6929

Référence : 51-JS-6889

Année(s) : 96-06

Black Aluminum Valve Cover Kit; Includes Valve Cover; Gasket, Oil Plug and Hardware.

Référence : 51-JS-6905

High Performance Front Cross Drilled and Slotted Rotors; Includes Front Left and Right Rotors.

Référence : 51-JS-6930

5″ Drop Pitman Arm; Improve steering performance with RT Off-Road's Drop Pitman Arm. Lifting your Jeep without addressing the steering angles oftentimes results in bump steer and decreased turning radius. Installation of this drop pitman arm will reduce the operating angle of the drag link, resulting in improved steering feel and less wear on steering parts. Each arm is designed to bolt in place of the factory piece with no interference issues.

Référence : 51-JS-6969

Fuel Tank Kit; Includes 20-Gallon Plastic Tank, Fuel Sending Unit, In-Tank Fuel Filter, Fuel Tank Straps and Sending Unit Gasket.

Référence : 51-JS-6908

Référence : 51-JS-7000

RT Off-Road's upgraded Sway Bar Links are an affordable upgrade that increases performance and handling. Not only will your vehicle perform better with our upgraded polyurethane bushing and boots, but the product will last longer than the factory rubber pieces it replaces. All sway bar links install in place of the factory link.Black powder coated body with blue polyurethane boots and bushings; Polyurethane bushings provide long lasting performance and handling; Installs using factory hardware.

Référence : 51-JS-5977

Référence : 51-JS-6904

Référence : 51-JS-5838

Black Anodized Throttle Body Spacer Kit; 1″ Thick to Provide a Smoother, Faster and More Dense Air Charge Resulting in HP, TQ and MPG Increases. Kit Includes: Aluminum Spacer, Gasket, Bolts and Washers.

Référence : 51-JS-6910

Front Left Side Marker Light; Clear Lens w/ Amber Bulb.

Référence : 51-JS-6894

A major problem in late 80's and early 90's Jeep vehicles were the vacuum disconnect front axles. RT Off-Road's Secure Disconnect Lock System removes and replaces that failure prone vacuum disconnect. The factory disconnect assembly is replaced with a reliable cable actuated system. The stainless steel cable is zinc coated to protect the already durable finish. Our aluminum housing replaces the factory vacuum assembly and installs directly in place with a new gasket. Our wiring kit will ensure the factory 4WD light continues to operate as it did originally. Finall, our dash bracket and hardware kit will make installation a snap.Includes Zinc-Coated Braided Stainless Steel Cable, Housing, Gasket, 4WD Switch, 4WD Switch Adapter, Cable Bracket & Miscellaneous Hardware; Cable Overall Measurement is 104″.

Référence : 51-JS-8137

Heavy Duty Zero Lash Ball Joint Set; Includes 1 Upper and 1 Lower Ball Joint w/ Hardware.

Référence : 51-JS-6892

RT Off-Road's Halogen Light Conversion Kits are an upgrade for the conventional factory sealed beam headlamps. Included in the Headlight Conversion Kit are two halogen bulbs and two cast housings with clear glass lenses. Our kit is DOT and SAE compliant. Includes a pair of 7″ round assemblies and H4 55/60W bulbs.

Référence : 51-JS-6879