Marque RT Off Road

Heavy duty solid steel construction; No modifications needed to factory mounting components; Left hand drive models only; Includes all hardware needed for installation; Steering stabilizer included.

Référence : 51-JS-6358

Stainless Steel Front Bumper Overlay.

Référence : 51-JS-6502

Référence : 51-JS-6592

Finish the look of your vehicle with RT Off-Road's fuel door. Available in both polished or black powder coated aluminum. Available with or without lock mechanism. Includes all hardware needed for installation.

Référence : 51-JS-6729

Année(s) : 07-18

Manufactured of 3/16″ Thick Matte Black Powder Coated Steel; Mounts to Frame Using Factory Hardware.

Référence : 51-JS-6797

Replace your vehicle’s dim, yellow dome lamps with a set of LED Dome Lamps by RT Off-Road. Each lamp features C.O.B. (Chip On Board) LED's, resulting in an impressive amount of light without the need to upgrade the charging system of the vehicle. A 50,000 hour LED bulb life means that these lamps are designed to last the life of the vehicle. Every aspect of product design, manufacturing, and assembling takes place in the USA. Included are 3 direct-fit LED Dome Lights. No cutting or splicing is necessary. Installs in plate of OEM dome light bulbs.

Référence : 51-JS-6868

High Performance Rear Cross Drilled and Slotted Brake Rotors from RT Off-Road are designed for the most extreme abuse. These Brake Rotors were tested on: the steep descents in Moab, UT; stop and go traffic in Boston, MA; and the long range treks in-between. Each brake rotor is machine slotted and cross drilled to provide maximum cooling. This drastic cooling helps eliminate brake fade and potential warping. The design rapidly expels friction gases, debris, and water from the rotor and pad surface. You can expect greater braking response, increased performance, longer life, and a sporty new look.Includes Rear Left and Right Cross Drilled and Slotted Rotors.

Référence : 51-JS-6933

Référence : 51-JS-7000

Eliminate drive line vibrations and increase strength of your NP231 with RT Off-Road's Slip Yoke Eliminator Kit. Each kit includes a replacement output housing, heavy duty main shaft, rear output yoke designed for a double-cardan drive shaft and all necessary hardware. The installation can be performed with the transfer case in or out of the vehicle with basic hand tools. Engineered to function with the factory speedometer sensor/cable and vacuum shift sensor.Fits all Jeep NP231 transfer cases; 1-3/8″ 32-spline main shaft and yoke; converts factory rear slip yoke to a CV style output; Includes installation instructions.Speedometer Drive Gear (4338996) Is Included; For Replacement Seal Use RT24003; For Replacement Bearing Use J8136622 (and remove snap ring); For Replacement Yoke Use 4856142 (1310 CV; 32 Splines); For Replacement Rear Yoke Washer Seal Use 4210973; For Replacement Yoke Nut Use J3182601.

Référence : 51-JS-5842

Right Stainless Mirror Support Arm.

Référence : 52-JS-3778

RT Off-Road's Big Brake Kit is the solution to the strain that oversized wheels and tires place on the braking system on any JK Wrangler. This Brake Kit features Calipers with a pair of 54mm pistons for increased clamping forces, resulting in increased piston area over the single piston calipers. The 13″ vented Brake Rotors give the braking system greater leverage. The end result of the Big Brake Kit when compared to OE brakes is a 22% shorter 60-0 distance! 17″ wheels are required for installation.Kit Includes Dual Piston Calipers w/ 54mm Pistons, Caliper Brackets, 13″ Diameter Rotors, Pads And All The Required Hardware For Installation. Larger bore brake Master Cylinder (Replacement Part #: 68091278AB) is also suggested for better brake pedal feel and greater braking performance.Note: This Kit Will Not Work on JK's with ″Moab″ Wheels (Identified By 5 Large Spokes) Without Wheel Spacers.

Référence : 51-JS-6069

Includes 2 Stainless Steel Door Handles and 1 Stainless Steel Tailgate Handle.

Référence : 51-JS-6436

Remove the doors from a Jeep without removing mirrors with RT Off-Road's Mirror Relocation Brackets. In this kit are 2 brackets that install into existing holes in the windshield frame. Includes 2 Brackets, 2 Spacers and 2 Washers.

Référence : 51-JS-6534

Plate Constructed of Stainless Steel; Plates Measure 8″ x 3″; Holes Located In Each Corner .125″ From The Edge; Switches Are Genuine 20A Carling Contura II Switches (SPST).

Référence : 51-JS-6625

Référence : 51-JS-6761

Référence : 51-JS-6829

Front or Rear PCV Valve Grommet For RT Off-Road Valve Covers (RT35001, RT35002 and RT35003).

Référence : 51-JS-6900

Equip any vehicle with an LED Headlight Bulb Kit by RT Off-Road. Each bulb features 4 Cree LEDs that produce 1500 lumens at only 16.8 watts, resulting in an impressive amount of light without the need to upgrade the charging system of the vehicle. A copper weave cloth is used as a heat sink in place of a noisy and failure prone fan. The color output from these bulbs is 6500k. Included are 2 direct-fit LED Headlamp Bulbs. No cutting or splicing is necessary.

Référence : 51-JS-6965

RT Off-Road's Side Steps will make entering and exiting the vehicle much easier as well as improving side protection from obstacles. Installation is a breeze, using the factory body mounting bolts to mount the steps to the vehicle. Each kit includes left and right steps, mounting brackets, hardware and installation instructions.Durable textured black powder coat finish; No-Slip flats for entering and exiting; 3″ diameter tubes; works with vehicles with or without a body lift; Easy no-drill installation.

Référence : 51-JS-8125

RT Off-Road's Heavy Duty Front Bumper is a heavy duty plate steel constructed upgrade over the factory bumper. The 3/16″ plate steel and tubular steel construction is protected with a durable black powder coat. Bumper two integrated D-Ring Mount for recovery, two fog light mounts, and additional holes for mounting lights. Installs into the factory bumper mounting location using the included hardware. Does not require any drilling or modification.

Référence : 51-JS-5962

Référence : 51-JS-6583

Black; Stick-On Type; No Drilling Required.

Référence : 51-JS-6720

Référence : 51-JS-6787