Marque Rough Trail

Angle Bracket for BELT3B Seat Belts; Left Side; Adds Height To Seat Belts For Models with Center Consoles.

Référence : 51-JS-8996

Heavy Duty Dana 35 Rear Differential Cover; 3/8″ Thick Forged Steel w/ Ribs to Increase Strength; Semi-Gloss Black Powder Coat.Fill Plug Located Higher Than Stock for a Higher Fluid Capacity; Mounting Surfaces Machined Flat to Prevent Leaks; Includes Flanged Hex Bolts, Recessed Fill Plug and RTV.

Référence : 51-JS-7006

Equip your vehicle with a low-profile LED Light Bar by RT Off-Road. Each lamp is constructed of an aluminum body. The 48 Nichia LEDs in each lamp produce 19200 lumens at only 144 watts, resulting in an impressive amount of light without the need to upgrade the charging system of the vehicle. Matte black anodization, an IP86 rating, and a 50,000 hour LED bulb life means that these lamps are designed to last, even in the harshest conditions. Every aspect of product design, manufacturing, and assembling takes place in the USA. Included is a light bar measuring 51.63″ x .75″ x 1.5″, roof light mount brackets with hardware, a wiring harness, and a switch.

Référence : 51-JS-5941

Référence : 51-JS-6451

Référence : 51-JS-6580

Référence : 51-JS-6490

Rear Big Brake Kit; Only Works with 17″ Wheels or Larger; 13.5″ Diameter Rotors; Rotors feature a 5 on 5″ and 5 on 5.5″ Bolt Pattern.Includes Pads, Rotors, Caliper Brackets, Caliper Pin Kit and Red Threadlocker; Utilizes the Factory Brake Caliper.

Référence : 51-JS-6916

Référence : 51-JS-6521

RT Off-Road's Windshield Channel is designed for aftermarket beach toppers, combo toppers and bowless replacement tops. Installs to factory windshield frame and includes all hardware needed for installation.

Référence : 51-JS-6846

1.5″ Wide Wheel Spacer Set with a 5 on 4.5″ Bolt Pattern; Includes 2 Gloss Black Anodized Wheel Spacers and 10 Wheel Nuts.Achieve an aggressive look and improved stability with a Wheel Spacer Kit from RT Off-Road. These 1.5″ thick spacers are an affordable option to add additional backspacing or expand the wheel options in on a specific vehicle. Each Wheel Spacer starts as a 6061 T6 Aluminum blank and is then machined to be hub-centric and wheel-centric to ensure proper fitment. They are finished in anodized black to ensure a long lasting life.For Replacement Wheel Stud Order RT32017.

Référence : 51-JS-6857

Stainless Steel Rear Bumperettes; Set of 2.

Référence : 51-JS-6501

Année(s) : 76-95

Référence : 51-JS-6586

Designed For Use With JK Wrangler Tube Doors; Paddle Style Door Handle And Latch Set Without Locks; Includes Left and Right Handles.Features Interior Handle, Exterior Handle and Latch Assembly; Black Textured Powder Coat Finish; Bolt Spacing: 3″ x 3.25″.

Référence : 51-JS-6759

Heavy Duty Chrysler 8.25″ Differential Cover; 3/8″ Thick Forged Steel w/ Ribs to Increase Strength; Semi-Gloss Black Powder Coat.Fill Plug Located Higher Than Stock for a Higher Fluid Capacity; Mounting Surfaces Machined Flat to Prevent Leaks; Includes Flanged Hex Bolts, Recessed Fill Plug and RTV.

Référence : 51-JS-7002

Stainless Steel; Kit Includes Battery Tray, Clamp, and Bolt.

Référence : 51-JS-6116

Includes 1 Chrome Tow Hook w/ Hardware; 10,000 Lbs Weight Capacity.

Référence : 51-JS-6802

Complete Rear Performance Kit Including 2 Drilled & Slotted Rotors, Pad Set, Parking Brake Shoes and All Hardware.High Performance Brake Rotors from RT Off-Road are designed for the most extreme abuse. These Brake Rotors were tested on: the steep descents in Moab, UT; stop and go traffic in Boston, MA; and the long range treks in-between. Each brake rotor is machine slotted and cross drilled to provide maximum cooling. This drastic cooling helps eliminate brake fade and potential warping. The design rapidly expels friction gases, debris, and water from the rotor and pad surface. You can expect greater braking response, increased performance, longer life, and a sporty new look.

Référence : 51-JS-6919

Référence : 51-JS-6512

Référence : 51-JS-6829

Référence : 51-JS-6515

Equip your vehicle with a low-profile LED Light Bar by RT Off-Road. Each lamp is constructed of an aluminum body. The 18 Nichia LEDs in each lamp produce 7200 lumens at only 54 watts, resulting in an impressive amount of light without the need to upgrade the charging system of the vehicle. Matte black anodization, an IP86 rating, and a 50,000 hour LED bulb life means that these lamps are designed to last, even in the harshest conditions. Every aspect of product design, manufacturing, and assembling takes place in the USA. Included is a light bar measuring 21.63″ x .75″ x 1.5″, hood hinge light mount brackets with hardware, a wiring harness, and a switch.

Référence : 51-JS-5942

Référence : 51-JS-6127

Cover a dented or rusty factory rear bumper with an RT Off-Road stainless steel Rear Bumper Overlay. Each bumper is manufactured of stainless steel and then polished to a brilliant finish. Bumper overlay includes all the bolt holes necessary to mount it to the vehicle and requires no drilling.

Référence : 51-JS-6503