Kits pignons/couronnes
-
Ring and Pinion, 4.10 Ratio, Front; 97-06 Jeep YJ/XJ, for Dana 30
Ring & Pinion Kit for Dana 30, 4.88 Ratio, 1992-2001 Cherokee, 1997-2006 Wrangler
Référence : 52-JS-9695
436,37 € TVA : 20% 363,64 € HT -
Ring and Pinion, 3.07 Ratio; 87-07 Jeep Wrangler/Cherokee, for Dana 35
Ring & Pinion Kit for Dana 35, 3.07 Ratio, 1987-2007 Jeep Wrangler YJ/TJ/JK, Cherokee XJ
Référence : 52-JS-9896
1 002,31 € TVA : 20% 835,26 € HT -
Ring and Pinion Kit, 5.13 Ratio; 97-06 Wrangler, for Dana 44/44
This 5.13 ratio ring and pinion with master install kit from Omix services Dana 44 front and Dana 44 rear axles found in 97-06 Jeep Wrangler TJ/LJ.
Référence : 52-JS-9902
1 411,15 € TVA : 20% 1 175,96 € HT -
Ring and Pinion, 4.27 Ratio, Rear; 84-91 Grand Wagoneer, for Dana 44
Ring & Pinion Kit for Dana 44, 4.27 Ratio, fits 84-91 Jeep Grand Wagoneer SJ.
Référence : 52-JS-9931
1 159,09 € TVA : 20% 965,91 € HT -
Ring and Pinion, 3.73 Ratio, Reverse; 82-11 Mustang/Truck/SUV, 8.8 In
Ford 8.8 - 3.73 Reverse Ring/Pinion by Alloy USA
Référence : 52-JS-9871
616,21 € TVA : 20% 513,51 € HT -
Ring and Pinion, 4.88 Ratio, Front; 97-06 TJ/ZJ, for Dana 30
This 4.88 ratio ring and pinion from Alloy USA fits Dana 30.
Référence : 52-JS-9735
376,28 € TVA : 20% 313,57 € HT -
Ring and Pinion, 4.11 Ratio, Turbo; 03-18 Toyota Truck/SUV, 8 Inch, V6
Toyota 8 (200mm) 4.11 V6/Turbo by Alloy USA
Référence : 52-JS-9884
470,38 € TVA : 20% 391,98 € HT -
Ring and Pinion, 3.73 Ratio, Rear; 72-06 Jeep CJ/Wrangler, for Dana 44
This 3.73 ratio ring and pinion gear set fits 72-75 Jeep CJ5/6, 86 CJ-7/8, and 97-06 Wrangler with a Dana 44 rear axle. Uses ten 3/8 inch ring bolts.
Référence : 52-JS-9844
376,28 € TVA : 20% 313,57 € HT -
Ring and Pinion, 4.88 Ratio, Front; 07-18 Wrangler JK/JKU, for Dana 44
This 4.88 ratio ring and pinion gear set from Alloy USA fits 07-18 Jeep Wrangler with Dana 44 front axle. Uses ten 7/16 or 1/2 inch ring gear bolts.
Référence : 52-JS-9914
376,28 € TVA : 20% 313,57 € HT -
Ring and Pinion, 3.73 Ratio, Rear; 50-06 Jeep CJ/Wrangler, Dana 44
Ring & Pinion Kit for Dana 44 rear and for Dana 44 W/ Tapered Axles, 3.73, 1950-1971 Models, 1972-1975 CJ5, 1972-1975 CJ6, 1986 CJ7, 87-06 Wrangler
Référence : 52-JS-9698
968,48 € TVA : 20% 807,07 € HT -
Ring and Pinion, 3.73 Ratio, Short, Front; 97-06 TJ/ZJ, for Dana 30
This 3.73 ratio ring and pinion from Alloy USA fits 1996+ TJ/ZJ for Dana 30
Référence : 52-JS-9754
376,28 € TVA : 20% 313,57 € HT -
Ring and Pinion, 3.73 Ratio, Front; 97-06 Jeep YJ/XJ, for Dana 30
Ring & Pinion Kit for Dana 30, 3.73 Ratio (41x11 Teeth), 1992-2001 Cherokee, 1997-2006 Wrangler
Référence : 52-JS-9685
552,29 € TVA : 20% 460,24 € HT -
Ring and Pinion, 4.10 Ratio; 03-06 Jeep Wrangler Rubicon, for Dana 44
Ring & Pinion Kit for Dana 44, 4.10 Ratio, Front/Rear, w/ factory air lockers, 2003-2006 Wrangler Rubicon
Référence : 52-JS-9828
839,01 € TVA : 20% 699,17 € HT -
Ring and Pinion, 4.56 Ratio, Front; 87-95 Jeep YJ/XJ, for Dana 30
Ring & Pinion Kit for Dana 30 w/ Disconnect, 4.56 Ratio (41x9 Teeth), 1984-1991 Cherokee, 1987-1995 Wrangler
Référence : 52-JS-9708
992,42 € TVA : 20% 827,02 € HT -
Ring and Pinion, 3.31 Ratio, Rear; 72-86 Jeep CJ5/CJ6/CJ7, for Dana 44
Ring & Pinion Kit for Dana 44 rear, 3.31 Ratio, 1972-1975 CJ5, 1972-1975 CJ6, 1986 CJ7
Référence : 52-JS-9693
1 648,41 € TVA : 20% 1 373,67 € HT -
Ring and Pinion, 5.38 Ratio, for Dana 44
This 5.38 ratio ring and pinion from Alloy USA fits Dana 44.
Référence : 52-JS-9774
385,70 € TVA : 20% 321,42 € HT -
Ring and Pinion, 4.88 Ratio, Rear; 84-06 Jeep XJ/YJ/TJ/LJ, for Dana 35
This 4.88 ratio ring and pinion gear set fits 84-01 Jeep Cherokee and 87-06 Wrangler with Dana 35 rear axle. Uses eight 3/8 inch ring gear bolts.
Référence : 52-JS-9874
434,97 € TVA : 20% 362,47 € HT -
Ring and Pinion Kit, 4.10 Ratio; 97-06 Wrangler, for Dana 44/44
This 4.10 ratio ring and pinion with master install kit from Omix services Dana 44 front and Dana 44 rear axles found in 97-06 Wrangler TJ
Référence : 52-JS-9892
1 223,00 € TVA : 20% 1 019,17 € HT -
Ring and Pinion Kit, 4.10 Ratio; 07-18 Jeep Wrangler, for Dana 44/44
This 4.10 ratio ring and pinion kit from Alloy USA fits 07-18 Jeep Wrangler Rubicon models with a Dana 44 front and rear axle.
Référence : 52-JS-9926
1 505,24 € TVA : 20% 1 254,37 € HT -
Ring and Pinion, 4.10 Ratio, Rear; 84-06 Jeep YJ/TJ/XJ, for Dana 35
This 4.10 ratio ring and pinion from Alloy USA fits Dana 35.
Référence : 52-JS-9720
376,28 € TVA : 20% 313,57 € HT -
Ring and Pinion, 4.56 Ratio, Rear; 72-06 Jeep CJ/Wrangler, for Dana 44
This 4.56 ratio ring and pinion gear set fits 72-75 Jeep CJ5/6, 86 CJ7/8, and 97-06 Wrangler with a Dana 44 rear axle. Uses ten 3/8 inch ring bolts.
Référence : 52-JS-9851
432,72 € TVA : 20% 360,60 € HT -
Ring and Pinion, 3.73 Ratio, Rear; 99-04 Grand Cherokee, for Dana 44
Ring & Pinion Kit for Dana 44, 3.73 Ratio, Rear, 1999-2000 Grand Cherokee WJ (before 3/29/00)
Référence : 52-JS-9833
1 028,18 € TVA : 20% 856,82 € HT -
Ring and Pinion, 3.73 Ratio; 87-07 Jeep Wrangler/Cherokee, for Dana 35
Ring & Pinion Kit for Dana 35, 3.73 Ratio, 1987-2007 Jeep Wrangler YJ/TJ/JK, Cherokee XJ
Référence : 52-JS-9718
469,00 € TVA : 20% 390,83 € HT -
Ring and Pinion, 3.54 Ratio, Reverse; 48-91 Willys/Jeep, for Dana 44
This 3.54 ratio ring and pinion from Alloy USA fits Reverse Dana 44.
Référence : 52-JS-9762
470,38 € TVA : 20% 391,98 € HT
