Kits pignons/couronnes
-
Ring and Pinion, 5.38 Ratio, Rear; 50-71 Willys/Jeep, for Dana 44
Ring & Pinion Kit for Dana 44, w/ Tapered Axles, 5.38 Ratio (43x8 Teeth), 10 Spline, 1950-1971 Models
Référence : 52-JS-9782
1 016,57 € TVA : 20% 847,14 € HT -
Ring and Pinion, 4.10 Ratio, Front; 07-18 Wrangler JK/JKU, for Dana 44
This 4.10 ratio ring and pinion gear set fits 07-18 Wrangler with Dana 44 front axle. Uses ten 7/16 or 1/2 inch ring gear bolts.
Référence : 52-JS-9912
376,28 € TVA : 20% 313,57 € HT -
Ring and Pinion, 4.88 Ratio, 10 Bolt; 03-18 Toyota Truck/SUV, 8 Inch
Toyota 8 (200Mm) 4.88 Ring/Pinion by Alloy USA
Référence : 52-JS-9701
564,45 € TVA : 20% 470,37 € HT -
Ring and Pinion, 4.88 Ratio; 99-05 Excursion/F250/F350, for Dana 50
This 4.88 ratio ring and pinion from Alloy USA fits Dana 50.
Référence : 52-JS-9869
470,38 € TVA : 20% 391,98 € HT -
Ring and Pinion, 4.10 Ratio, 84-06 Jeep YJ/TJ/XJ/ZJ/MJ, for Dana 35
This 4.10 ratio ring and pinion for Dana 35 by Alloy USA
Référence : 52-JS-9761
849,14 € TVA : 20% 707,62 € HT -
Ring and Pinion Kit, 4.56 Ratio; 97-06 Wrangler, for Dana 30/35
This 4.56 ratio ring and pinion with master install kit from Omix services Dana 30 front and Dana 35 rear axles found in 97-06 Wrangler TJ
Référence : 52-JS-9666
1 223,00 € TVA : 20% 1 019,17 € HT -
Ring and Pinion, 4.88 Ratio, Front; 03-06 Wrangler TJ/LJ, for Dana 44
This 4.88 ratio ring and pinion gear set from Alloy USA fits 03-06 Jeep Wrangler Rubicon with Dana 44 front and rear axles.
Référence : 52-JS-9845
376,28 € TVA : 20% 313,57 € HT -
Ring and Pinion, 4.88 Ratio, Front; 84-95 Jeep XJ/YJ, for Dana 30
This 4.88 ratio ring and pinion gear set fits 84-91 Jeep Cherokee and 87-95 Wrangler with Dana 30 front axle. Uses eight 3/8 inch ring gear bolts.
Référence : 52-JS-9857
389,00 € TVA : 20% 324,17 € HT -
Ring and Pinion, 4.27 Ratio, Front; 72-86 CJ5/CJ6/CJ7/CJ8, for Dana 30
Ring & Pinion Kit for Dana 30, 4.27 Ratio (47x11 Teeth), 1972-1983 CJ5, 1972-1975 CJ5, 1976-1986 CJ7, 1981-1986 CJ8
Référence : 52-JS-9712
1 122,80 € TVA : 20% 935,67 € HT -
Ring and Pinion, 4.88 Ratio, Rear; 84-06 Jeep YJ/TJ/XJ, for Dana 35
This 4.88 ratio ring and pinion from Alloy USA fits Dana 35.
Référence : 52-JS-9725
376,28 € TVA : 20% 313,57 € HT -
Ring and Pinion, 4.88 Ratio, Front; 97-06 Wrangler TJ/LJ, for Dana 30
This 4.88 ratio ring and pinion gear set from Alloy USA fits 97-06 Jeep Wrangler with Dana 30 front axle. Uses eight 3/8 inch ring gear bolts.
Référence : 52-JS-9818
401,98 € TVA : 20% 334,98 € HT -
Ring and Pinion, 3.73 Ratio, Reverse; 48-91 Willys/Jeep, for Dana 44
This 3.73 ratio reverse ring and pinion from Alloy USA fits Dana 44.
Référence : 52-JS-9860
376,28 € TVA : 20% 313,57 € HT -
Ring and Pinion, 5.13 Ratio, Rear; 07-18 Wrangler JK/JKU, for Dana 44
This 5.13 ratio ring and pinion gear set from Alloy USA fits 07-18 Jeep Wrangler with Dana 44 rear axle. Uses ten 7/17 or 1/2 inch ring gear bolts.
Référence : 52-JS-9916
432,72 € TVA : 20% 360,60 € HT -
Ring and Pinion Kit, 4.88 Ratio; 07-18 Jeep Wrangler, for Dana 44/44
This 4.88 ratio ring and pinion kit from Alloy USA fits 07-18 Jeep Wrangler Rubicon models with a Dana 44 front and rear axle.
Référence : 52-JS-9923
1 599,30 € TVA : 20% 1 332,75 € HT -
Ring and Pinion, 3.55 Ratio, Rear; 99-04 Grand Cherokee, for Dana 35
Ring & Pinion Kit for Dana 35, 3.55 Ratio, 1999-2004 Jeep Grand Cherokee WJ
Référence : 52-JS-9793
1 021,20 € TVA : 20% 851,00 € HT -
Ring and Pinion, 4.30 Ratio; 82-11 Ford Mustang/Truck/SUV, 8.8 Inch
Ford 8.8-4.30 Ring/Pinion by Alloy USA
Référence : 52-JS-9759
502,62 € TVA : 20% 418,85 € HT -
Ring and Pinion, 3.73 Ratio, Rear, Trac Lok; 99-03 WJ, for Dana 35
Ring & Pinion Kit for Dana 35, 3.73 Ratio, Rear, with Trac-Loc, 1999-2003 Grand Cherokee XJ/WJ
Référence : 52-JS-9821
938,41 € TVA : 20% 782,01 € HT -
Ring and Pinion, 4.27 Ratio, Rear; 72-86 Jeep CJ5/CJ6/CJ7, for Dana 44
Ring & Pinion Kit for Dana 44 rear, 4.27 Ratio, 1972-1975 CJ, 1986 CJ7
Référence : 52-JS-9696
1 231,84 € TVA : 20% 1 026,53 € HT -
Ring and Pinion, 4.11 Ratio, Rear; 84-06 Jeep XJ/YJ/TJ/LJ, for Dana 35
This 4.11 ratio ring and pinion gear set fits 84-01 Jeep Cherokee and 87-06 Wrangler with Dana 35 rear axle. Uses eight 3/8 inch ring gear bolts.
Référence : 52-JS-9849
399,96 € TVA : 20% 333,30 € HT -
Ring and Pinion, 3.55 Ratio; 87-07 Jeep Wrangler/Cherokee, for Dana 35
Ring & Pinion Kit for Dana 35, 3.55 Ratio, 1987-2007 Jeep Wrangler YJ/TJ/JK, Cherokee XJ
Référence : 52-JS-9717
1 103,31 € TVA : 20% 919,42 € HT -
Ring and Pinion, 4.56 Ratio, Front; 97-06 TJ/ZJ, for Dana 30
This 4.56 ratio ring and pinion from Alloy USA fits Dana 30.
Référence : 52-JS-9739
376,28 € TVA : 20% 313,57 € HT -
Ring and Pinion, 3.73 Ratio, Front, Reverse Rotation, for Dana 30
This 3.73 reverse ratio ring and pinion from Alloy USA fits Dana 30.
Référence : 52-JS-9703
376,28 € TVA : 20% 313,57 € HT -
Ring and Pinion, 3.55 Ratio, Rear; 91-05 Jeep XJ/KJ, Chrysler 8.25
Ring & Pinion Kit for Chrysler 8.25, 3.55 Ratio, 1991-2001 Cherokee XJ
Référence : 52-JS-9809
439,00 € TVA : 20% 365,83 € HT -
Ring and Pinion, 5.13 Ratio, Reverse; 55-12 Chrys/GM/Ford, for Dana 60
This 5.13 reverse ratio ring and pinion from Alloy USA fits Dana 60.
Référence : 52-JS-9767
470,38 € TVA : 20% 391,98 € HT
