Differentiel
-
Differential Cross Shaft, Rear; 87-95 Jeep Wrangler YJ, for Dana 44
Differential Cross Shaft for Dana 44 rear, 1987-1995 Wrangler
Référence : 53-JS-0661
24,82 € TVA : 20% 20,68 € HT -
Master Overhaul Kit; 63-87 Toyota Land Cruiser, 9.5 Inch Axles
Master Overhaul Kit Straight by Alloy USA
Référence : 53-JS-0706
470,38 € TVA : 20% 391,98 € HT -
Ring and Pinion, 3.54 Ratio; 48-91 Willys/Jeep, for Dana 44
This 3.54 ratio ring and pinion from Alloy USA fits Dana 44.
Référence : 52-JS-9724
385,70 € TVA : 20% 321,42 € HT -
Ring and Pinion, 3.07 Ratio, Front; 01-06 Jeep TJ/LJ/XJ, for Dana 30
Ring & Pinion Kit for Dana 30, 3.07 Ratio (34x14 Teeth), 2001-2006 Wrangler and 2001 Cherokee
Référence : 52-JS-9810
923,03 € TVA : 20% 769,19 € HT -
Oil Seal, Front, Drive Pinion; 05-18 Jeep JK/JKU/WK/XK, for Dana 35/44
This replacement pinion oil seal from Omix fits 05-09 Jeep Grand Cherokee and 07-10 Wrangler with Dana 35 and with Dana 44 rear axles.
Référence : 53-JS-0458
21,99 € TVA : 20% 18,32 € HT -
Ring and Pinion, 5.13 Ratio; 82-11 Ford Mustang/Truck/SUV, 8.8 Inch
Ford 8.8 - 5.13 Ring/Pinion by Alloy USA
Référence : 52-JS-9760
502,62 € TVA : 20% 418,85 € HT -
Ring and Pinion, 4.56 Ratio, Front; 72-86 CJ5/CJ7/CJ8, for Dana 30
This 4.56 ratio ring and pinion gear set from Alloy USA fits 72-86 Jeep CJ5s, CJ7s, CJ8s with Dana 30 front axle. Uses eight 3/8 inch ring gear bolts.
Référence : 52-JS-9822
426,41 € TVA : 20% 355,34 € HT -
Axle Tube Seal, Front; 41-76 Willys/Ford/Jeep, for Dana 25/27
Outer Wheel Oil Seal with Dana 27 Rear, 1941-1966 MB, 1941-1966 Ford GPW
Référence : 52-JS-8508
3,99 € TVA : 20% 3,32 € HT -
Ring and Pinion, 3.73 Ratio; 93-95 Jeep Wrangler/Cherokee, for Dana 35
Ring & Pinion Kit for Dana 35, 3.73 Ratio, 1993-1995 Jeep Wrangler YJ, 1993-1995 Cherokee XJ
Référence : 52-JS-9700
1 095,64 € TVA : 20% 913,03 € HT -
TJ: Dana 44/Dana 60 Rear Axle Bracket Kit
TJ Axle Bracket Kit.
Référence : 53-JS-5375
1 003,56 € TVA : 20% 836,30 € HT -
Bolt Sleeve, Ring Gear, 1/2 Inch to 7/16 Inch
This ring gear bolt sleeve from Alloy USA allows you to use 7/16 inch ring gear bolts on ring gears with 1/2 inch holes.
Référence : 52-JS-9734
6,51 € TVA : 20% 5,42 € HT -
Ring and Pinion, 5.13 Ratio, 14 Bolt, HD; 72-18 Chevrolet/GMC, 10.5 In
GM/Chrysler 10 1/2 5.13 Ring/Pinion by Alloy USA
Référence : 52-JS-9726
376,28 € TVA : 20% 313,57 € HT -
Differential Pinion Spacer, Collapsible; 97-06 Wrangler TJ, for D30
Collapsible Pinion Spacer for Dana 30, 1997-2006 Wrangler, 1992-2001 Cherokee, 1996-1998 Grand Cherokee, 1999-2000 Grand Cherokee with Dana Super 30
Référence : 53-JS-0480
10,89 € TVA : 20% 9,07 € HT -
Oil Seal, Front, Inner, Right, 2.12 OD; 84-95 Jeep YJ/XJ, for Dana 30
This replacement inner axle oil seal fits the right side of 84-91 Jeep Cherokee and 87-95 Wrangler with Dana 30 front axle. (2.12 inch O.D.)
Référence : 52-JS-8595
12,00 € TVA : 20% 10,00 € HT -
Differential Carrier Bearing Kit, for Dana 44
This differential bearing kit from Omix for Dana 44 axles.
Référence : 53-JS-0565
95,59 € TVA : 20% 79,66 € HT -
Spider Gear Kit; 72-86 Jeep CJ5/CJ6/CJ7/CJ8 Scrambler, for Dana 30
Spider Gear Kit for Dana 30, 1972-1983 CJ5, 1972-1975 CJ5, 1976-1986 CJ7, 1981-1986 CJ8
Référence : 53-JS-0018
332,76 € TVA : 20% 277,30 € HT -
Ring and Pinion, 5.13 Ratio; 48-91 Willys/Jeep, for Dana 44
This 5.13 ratio ring and pinion from Alloy USA fits Dana 44.
Référence : 52-JS-9933
385,70 € TVA : 20% 321,42 € HT -
Boulder Aluminum Differential Cover, Black, for Dana 30
This high strength cast aluminum differential cover from Rugged Ridge fits Dana 30 axles.
Référence : 53-JS-0693
Année(s) : 50-20
207,04 € TVA : 20% 172,53 € HT -
Differential Pinion Spacer, Rear, Collapsible; 07-18 Wrangler, for D44
This collapsible pinion spacer for rear Dana 44 from Omix fits 07-18 Jeep Wrangler. Sold as 1-piece
Référence : 52-JS-9969
8,50 € TVA : 20% 7,08 € HT -
Ring and Pinion, 3.54 Ratio, Rear; 87-93 Jeep Cherokee XJ, for Dana 44
Ring & Pinion Kit for Dana 44, 3.54 Ratio, Rear, 1986-1993 Cherokee
Référence : 52-JS-9705
716,92 € TVA : 20% 597,43 € HT -
Ring and Pinion, 4.10 Ratio; 55-12 Chrysler/GM/Ford, for Dana 60
This 4.10 ratio ring and pinion from Alloy USA fits Dana 60.
Référence : 52-JS-9743
470,38 € TVA : 20% 391,98 € HT -
Ring and Pinion, 4.56 Ratio; 93-97 Ford F-150/F-250, 10.25 Inch Axles
Ford 10 1/4-4.88 Ring/Pinion by Alloy USA
Référence : 52-JS-9750
376,28 € TVA : 20% 313,57 € HT -
Oil Seal, Front, Inner; 72-06 CJ/YJ/TJ/XJ/ZJ/WJ/MJ/SJ, for Dana 30
This inner axle oil seal from Omix fits Dana 30 front axles found in 72-83 CJ5, 72-75 CJ6, 76-86 CJ7, 81-85 CJ8 Scrambler, 84-90 Grand Wagoneer SJ, 84-01 Cherokee XJ, 86-92 Comanche MJ, 72-75 DJ5 Dispatcher, 93-04 Grand Cherokee ZJ/WJ, and 87-06 Wrangler YJ/TJ/LJ.
Référence : 52-JS-8579
Année(s) : 76-06
9,80 € TVA : 20% 8,17 € HT -
Ring and Pinion, 4.88 Ratio, Reverse; 82-11 Mustang/Truck/SUV, 8.8 In
Ford 8.8 - 4.88 Reverse Rotation by Alloy USA
Référence : 52-JS-9770
793,02 € TVA : 20% 660,85 € HT
