Kits pignons/couronnes
-
Ring and Pinion, 3.73 Ratio, Front; 99-04 Grand Cherokee, for Dana 30
Ring & Pinion Kit for Dana Super 30, 3.73 Ratio, 1999-2004 Grand Cherokee
Référence : 52-JS-9812
385,00 € TVA : 20% 320,83 € HT -
Ring and Pinion, 3.54 Ratio, Front; 87-95 Jeep YJ/XJ, for Dana 30
Ring & Pinion Kit for Dana 30 w/ Disconnect, 3.54 Ratio (39x11 Teeth), 1984-1991 Cherokee, 1987-1995 Wrangler
Référence : 52-JS-9684
1 735,01 € TVA : 20% 1 445,84 € HT -
Ring and Pinion, 4.88 Ratio, Turbo; 03-18 Toyota Truck/SUV, 8 Inch, V6
Toyota 8 (200Mm) 4.88 V6/Turbo by Alloy USA
Référence : 52-JS-9887
376,28 € TVA : 20% 313,57 € HT -
Ring and Pinion Kit, 5.13 Ratio; 07-18 Jeep Wrangler, for Dana 44/44
This 5.13 ratio ring and pinion kit from Alloy USA fits 07-18 Jeep Wrangler Rubicon models with a Dana 44 front and rear axle.
Référence : 52-JS-9924
1 599,30 € TVA : 20% 1 332,75 € HT -
Ring and Pinion, 4.56 Ratio, Front; 97-06 Wrangler TJ/LJ, for Dana 30
This 4.56 ratio ring and pinion gear set from Alloy USA fits 97-06 Jeep Wrangler with Dana 30 front axle. Uses eight 3/8 inch ring gear bolts.
Référence : 52-JS-9830
426,41 € TVA : 20% 355,34 € HT -
Ring and Pinion, 4.09 Ratio, Rear; 72-86 Jeep CJ5/CJ6/CJ7, for Dana 44
Ring & Pinion Kit for Dana 44 rear, 4.09 Ratio, 1972-1975 CJ, 1986 CJ7
Référence : 52-JS-9694
1 103,00 € TVA : 20% 919,17 € HT -
Ring and Pinion, 3.55 Ratio, Front; 99-03 Grand Cherokee, for Dana 30
Ring & Pinion Kit for Dana 30, 3.55 Ratio (39x11 Teeth), 1999-2003 Grand Cherokee WJ
Référence : 52-JS-9820
921,47 € TVA : 20% 767,89 € HT -
Ring and Pinion, 4.56 Ratio, Front; 71-86 CJ5/CJ6/CJ7/CJ8, for Dana 30
Ring & Pinion Kit for Dana 30, 4.56 ratio, fits 71-86 Jeep CJ models.
Référence : 52-JS-9775
471,82 € TVA : 20% 393,18 € HT -
Ring and Pinion, 4.56 Ratio, Rear; 02-02 Wrangler TJ, for Dana 35
Ring & Pinion Kit for Dana 35, 4.56 Ratio, 2002 Jeep Wrangler TJ
Référence : 52-JS-9733
960,36 € TVA : 20% 800,30 € HT -
Spider Gear Kit, 28 Spline; 71-08 GM Truck/SUV, 10 Bolt Axles
Spider Gear Kit GM10-Bolt by Alloy USA
Référence : 52-JS-9800
282,22 € TVA : 20% 235,18 € HT -
Ring and Pinion, 5.38 Ratio, Front; 07-18 Wrangler JK/JKU, for Dana 44
This 5.38 ratio ring and pinion gear set from Alloy USA fits 07-18 Jeep Wrangler with Dana 44 front axle. Uses ten 7/16 or 1/2 inch ring gear bolts.
Référence : 52-JS-9944
376,28 € TVA : 20% 313,57 € HT -
Ring and Pinion Kit, 4.10 Ratio; 97-06 Wrangler, for Dana 30/35
This 4.10 ratio ring and pinion with master install kit from Omix services Dana 30 front and Dana 35 rear axles found in 97-06 Wrangler TJ
Référence : 52-JS-9660
1 223,00 € TVA : 20% 1 019,17 € HT -
Ring and Pinion, 3.91 Ratio, Front; 99-04 Grand Cherokee, for Dana 30
Ring & Pinion Kit for Dana 30, 3.91 ratio, fits 99-04 Jeep Grand Cherokee WJ.
Référence : 52-JS-9814
923,36 € TVA : 20% 769,47 € HT -
Ring and Pinion, 3.55 Ratio; 91-01 Jeep Cherokee XJ, Chrysler 8.25 In
This ring and pinion set from Alloy USA fits Chrysler 8.25 inch differentials on 91-01 Jeep Cherokee XJ.
Référence : 52-JS-9856
564,45 € TVA : 20% 470,37 € HT -
Ring and Pinion, 3.07 Ratio, Rear; 87-03 Jeep YJ/TJ/XJ/MJ, for Dana 44
This 3.07 ratio ring and pinion kit from Omix fits Dana 44 rear axles in 87-90 Cherokee XJ, 87-92 Comanche MJ, and 87-03 Wrangler YJ/TJ
Référence : 52-JS-9819
881,28 € TVA : 20% 734,40 € HT -
Ring and Pinion, 3.55 Ratio, Front; 93-96 Grand Cherokee, for Dana 30
Ring & Pinion Kit for Dana 30, 3.55 Ratio (39x11 Teeth), 1993-1996 Grand Cherokee
Référence : 52-JS-9813
1 086,58 € TVA : 20% 905,48 € HT -
Ring and Pinion, 4.56 Ratio, 14 Bolt; 79-18 Chevrolet/GMC, 9.5 Inch
4.56 Ring/Pinion GM 9 1/2 by Alloy USA
Référence : 52-JS-9768
376,28 € TVA : 20% 313,57 € HT -
Ring and Pinion Kit, 3.73 Ratio; 97-06 Wrangler, for Dana 30/44
This 3.73 ratio ring and pinion with master install kit from Omix services Dana 30 front and Dana 44 rear axles found in 97-06 Wrangler TJ
Référence : 52-JS-9665
1 223,00 € TVA : 20% 1 019,17 € HT -
Ring and Pinion, 4.56 Ratio, Front; 97-06 Jeep YJ/XJ, for Dana 30
Ring & Pinion Kit for Dana 30, 4.56 Ratio, 1992-2001 Cherokee, 1997-2006 Wrangler
Référence : 52-JS-9687
436,37 € TVA : 20% 363,64 € HT -
Ring and Pinion, 3.55 Ratio, Front; 97-06 Jeep YJ/XJ, for Dana 30
Ring & Pinion Kit for Dana 30, 3.55 Ratio (39x11 Teeth), 1992-2001 Cherokee, 1997-2006 Wrangler
Référence : 52-JS-9682
1 033,76 € TVA : 20% 861,47 € HT -
Ring and Pinion, 3.73 Ratio, Rear; 84-06 Jeep XJ/YJ/TJ/LJ, for Dana 35
This 3.73 ratio ring and pinion gear set fits 84-01 Jeep XJ and 87-06 Wrangler YJ/TJ with Dana 35 rear axle. Uses eight 3/8 inch ring gear bolts.
Référence : 52-JS-9861
376,28 € TVA : 20% 313,57 € HT -
Ring and Pinion, 4.88 Ratio; 55-12 Chrysler/GM/Ford, for Dana 60
This 4.88 ratio ring and pinion from Alloy USA fits Dana 60.
Référence : 52-JS-9748
470,38 € TVA : 20% 391,98 € HT -
Ring and Pinion, 4.56 Ratio, Front; 07-18 Wrangler JK/JKU, for Dana 44
This 4.56 ratio ring and pinion gear set from Alloy USA fits 07-18 Wrangler with Dana 44 front axle. Uses ten 7/16 or 1/2 inch ring gear bolts.
Référence : 52-JS-9927
432,72 € TVA : 20% 360,60 € HT -
Ring and Pinion, 4.56 Ratio, Short; 93-97 F150/F250, 10.25 Inch Axles
Ford 10 1/4-4.56 Ring/Pinion by Alloy USA
Référence : 52-JS-9777
821,80 € TVA : 20% 684,83 € HT
